The Effects Kit is made for the player that wants to customize cables for a pedal board or rack. You can cut the
supplied 10 ft. cable any length you want. We also suggest getting our Cable Checker and Cable Cutter. Stress
Relief Jackets (caps) are available in a wide array of colors to customize your rig.
We put together 10 feet of cable, and 10 right angle plugs and black jackets.

Instructions for Assembling George L’s Cable & Plugs

Straight Plugs Assembly:

1. DO NOT STRIP CABLE. 2. Cut with a sharp instrument. Make it straight and clean. 3. Back set screw out, far enough to allow cable to pass. 4. Put plug on cable and push plug on to the needle. This is your hot connection. 5. Tighten set screw down to touch the cable. Then tighten the screw 1 1/2 – 2 rotations. This is the ground connection.

Right Angle Plugs Assembly:

1. DO NOT STRIP CABLE. 2. Cut with a sharp instrument. Make it straight and clean. 3. Remove cap from right angle plug 4. Push cable onto the needle. DO NOT FORCE, and HOLD CABLE WITH YOUR THUMB. 5. Bend cable enough to start screwing the cap back on. Let the twisting of the cap bring the cable down. 6. Screw cap down completely to create the ground.

Continue Shopping
Browse more Cables or George L's products.