BRISBANE (07) 3892 3292
FREE SHIPPING! ON ORDERS OVER $199!!

Disaster Area DMC-2 Gen2

Sold Out

or make 4 interest-free payments of $42.25 fortnightly with Afterpay More info

Assembled and tested two-button controller in a 1590A-sized box (3.6″ L x 1.5″ W x 1.25″ H.) MIDI OUT (5-pin DIN connector) USB MIDI PORT 9V IN (2.1mm ID barrel jack) TWO FOOTSWITCHES TWO LEDs The DMC-2 Gen2  is our most compact MIDI controller pedal.  It can control the Strymon...

Assembled and tested two-button controller in a 1590A-sized box (3.6″ L x 1.5″ W x 1.25″ H.)

  • MIDI OUT (5-pin DIN connector)
  • USB MIDI PORT
  • 9V IN (2.1mm ID barrel jack)
  • TWO FOOTSWITCHES
  • TWO LEDs

The DMC-2 Gen2  is our most compact MIDI controller pedal.  It can control the Strymon Timeline, Line 6 M Series (M5, M9, M13,) or the Eventide Factor Series (Timefactor, Modfactor, Pitchfactor, SPACE, H9.)

The DMC-2 Gen2 is based on our popular DMC-2 controller, but it has been updated to use our powerful new Gen2 architecture.  It has been updated (August 2013) with a smaller enclosure, so that it fits on the most compact of pedalboards.  The footswitches are spaced approximately 3″ apart.  The DMC-2 requires 12mA of current at 9VDC, and may be powered by most popular power supplies.  Due to its low current draw and internal isolation, the DMC-2 can work on a daisy-chain power connector with most other devices.

The DMC-2 Gen2 adds in USB MIDI functionality – this means that you can connect the DMC-2 Gen2 to your computer running DAW or other performance software such as Ableton Live, Mainstage, etc. and the controller will be seen as a MIDI interface.  You can use the buttons on the controller to change programs or send messages, and any data you send from the computer to the DMC-2 Gen2 interface will be passed out to the 5-pin MIDI port on the DMC.  The DMC-2 Gen2 will pass all types of MIDI messages including program changes, continuous controllers, note on / off, SysEx, and clock.

The DMC-2 Gen2 is also compatible with the Apple iPad using the Apple Camera Connection Kit (either Lightning or 30-pin.)  The iPad will power the DMC-2 Gen2 and all of the USB MIDI functions work as described above.  You can use the DMC-2 Gen2 to change presets in your synth or guitar apps such as JamUp, Bias, Amplitube and more.

Unlike some of the other compact controller options on the market, the DMC-2 does not require modifying your Timeline or other MIDI-capable pedal.  All of its functions are enabled using a single MIDI cable, and your MIDI pedal remains fully functional at all times.

As an example, one available modification allows the use of a passive “Aux Switch” to bank the Timeline up and down.  While this is convenient, it still requires the user to step on the A or B button on the Timeline to activate the chosen preset.  The DMC-2 moves up and down by tapping its footswitches, and then the user can activate a preset by “holding” the left or right (A or B) switch.  It can also allow for fast preset scrolling.

The Aux Switch mod also is non-functional while the Timeline is in the Looper mode (pressing either switch stops the looper!)  The DMC-2 will allow preset or bank scrolling while in looper mode, or it can act as a looper control while the Timeline remains in preset mode!  No simple passive switch can match the versatility of the DMC-2.

Please select the desired firmware and finish from the menu above.

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions.

If an item you receive is faulty get in touch with us ASAP.

Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP!

This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment.

Just treat it nice and all will be good!

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

"LOVE IT Or Exchange It Within 14 Days"!

The item MUST BE sent back in the same condition it arrived in and have all the materials it arrived with (manual,warranty card,all accessories) and be packaged in the original box.

Items returned in undesired condition (scratched,chipped, etc) will be subject to a restocking charge of up to 30%. Modded items will not be refunded!

Postage must be paid by the purchaser to get the item returned to us and we will exchange at our discretion the amount of the products but not the postage costs.

Items must arrive here within 14 days of your order being placed.

Some items cannot be returned like Pedalboards you have already put velcro on, strings, pedalboard tape, Cables and DIY cable kits.

Please don't use the Manufacturers box as the packing box or you will automatically be charged a 30% restocking fee!

Email us BEFORE returning your items so we can resolve or sort out any problems you may have and just so we know to expect the item. You may also want to insure or register your item as we don't take responsibility for lost or damaged post.

You Might Like

Sale

Unavailable

Sold Out