BRISBANE (07) 3892 3292
FREE SHIPPING! ON ORDERS OVER $199!!

One Control Salamandra Tail Loop

or make 4 interest-free payments of $99.75 fortnightly with Afterpay More info

This is an effect switcher with increased usability and operability. The One Control Salamandra Tail Loop was specially developed to control the effect with more flexibility. It functions well even on a small pedal board, and instantly enables you to do operations that are impossible with a normal set up.In this small...

videos

This is an effect switcher with increased usability and operability. The One Control Salamandra Tail Loop was specially developed to control the effect with more flexibility. 

It functions well even on a small pedal board, and instantly enables you to do operations that are impossible with a normal set up.

In this small housing, there are 3 effect groups that can freely set the routing, a BJF Buffer that switches between on and off, up to 16 possible presets available, and even a tuner out and an independent music switch are all included!

Not only controlling the entire pedal board, which uses a small number of effectors, but also controlling the effects (including some of the space distortion and amp effect loop) whose connection orders need to be changed depending on the track.

While having these functions, it has simple and high-level operability using 4 foot switches, and large bright segment displays. It doesn’t take up space on the board and is easy to carry, but this programmable Switcher will vastly improve the operability. 
16 Presets
By choosing the routing with an open connection order of 3 effect loops, there are 16 possible combinations (including the all bypass setting). On the other hand, because the compact housing always limits the operability, fewer preset options allow for higher operability.

You can save up to 16 presets with the Salamandra Tail Loop. This is the minimum number of presets to allow saving all of the connection orders, designed this way so as to maximize both the functionality and operability.
Select Presets with Simple Operations
You can save 16 presets on the Salamandra Tail Loop itself. The presets are saved as 2 programs, 4 banks, and 2 lanes so that you can activate the programs without many foot switches. 

Because of the compact size of the unit, a large number of foot switches would have made it difficult to use. So we designed it with two program settings in each bank.
As there are 16 programs in all, at first we made it with 8 banks and 2 program structures using 4 foot switches, with bank up and bank down assigned functions, making it rather hard to use.
So we redesigned the preset selection from an ergonomic point of view so it has only a bank up bank switch that cycles between up to four banks. Additionally, if you hold down the bank up switch for 2 seconds you can switch the lane. This way with only 3 foot switches you can use all of the presets.
All of the presets can be operated with one foot, and you don’t need to go between multiple foot switches when you’re using it, which minimizes any mistakes during use.
The 4th foot switch that is no longer used to select a preset now independently controls a mute/tuner out switch, dramatically improving operability.
Lock Switch
We’ve installed a preset lock slide switch so that you don’t accidentally change the preset by pushing a button by mistake during a performance.

Free Routing Control 
Audio routing is creating an audio signal flow. Audio routing is about a cable connecting the input from the effect, and going from the output to the next effect. 

The Salamandra Tail Loop allows you to freely switch the routing of 3 effect loops. Normally, when you connect a compact effect, the signal order is the order of connection, 1-2-3, but when you use the Salamandra Tail Loop, you can order the signals however you like 2-1-3, 3-2-1, etc.
The settings for the connection order on the effect are simple, and the connection order is displayed as is on the display, so you can check the current connection order at a glance.

Effects of Switching the Routing
You can make big changes to the effect and tone based on the connection order of the effect. For example, with a distortion effect and a booster pedal, depending on which one you connect first, you can switch between an increase in volume for the effect booster and a gain boost. It’s known as a reverb effect, and normally you connect it toward the back to make a space  sound, and if you connect the display pedal in the front, it creates a tricky effect that assists in playing. Also, if you change the connection order of the wah-wah pedal and the fuzz pedal, you can choose which effect is emphasized. In this way, it’s possible to create new effects that you hadn’t even thought of before by changing the connection order and combination of various effects.


Instant Bypassing
The Salamandra Tail Loop can save the minimum necessary 16 program presets. There are up to two presets for each bank, so if you set some programs for all bypass, the number of programs will be suppressed.

With the Salamandra Tail Loop,  by pressing the foot switch of the program you have currently selected, you’ll instantly move into bypass mode. Since you can also set it to bypass all programs, the settings allow for flexible operation to meet your needs.

Free Buffer Settings
The Salamandra Tail Loop has a BJF Buffer installed in the input area. The BJF Buffer is of very high quality, and is known for its natural, transparent sound.

The Salamandra Tail Loop has four possible buffer settings for each program.
  1. Selected Program: ON / Bypass: OFF
  2. Selected Program: ON / Bypass: ON
  3. Selected Program: OFF / Bypass: ON
  4. Selected Program: OFF / Bypass: OFF

​​Response to Unforeseen Circumstances
The Salamandra Tail Loop has a standard center minus plug and a 2.1mm barrel type DC9V adapter. We made it compatible with an adapter that is used by many compact effects, so it doesn’t need any external adapter just for a switcher.
Also, if you accidentally pull out the power adapter during a performance and lose power, the sound won’t be muted. If power is lost, it automatically switches to true bypass mode, and there is no interruption in the sound, allowing you to continue your performance.
Features:
  • Change the routing by adjusting the connection order, programmable 3 loop switcher
  • Amazingly compact size (110 x 115 x 60mm)
  • Weighs the same as one compact effect (400g)
  • Easy-to-use original slanted housing made of strong aluminum
  • Memory capable of handling 16 programs to cover all possible connection orders and combinations
  • Simple to use with 3 levels comprised of 2 programs, 4 banks, and 2 lanes
  • BJF Buffer installed in the input area
  • Each program has Effect ON / Bypass and the buffer can be preset ON / OFF
  • Pressing the currently selected PGM switch will immediately turn on Bypass (can also be programmed to toggle the buffer ON / OFF)
  • Independent Mute / Tuner out Switch
  • Lock switch to prevent accidentally changing the program during a performance
  • Uses standard DC9V adapter
  • Prevents muting during unforeseen power loss by automatically switching to true bypass mode
Specifications
​Size: 110 (W) x 115 (D) x 60 (H) mm
Weight: 400g
Power: DC9V
Power Consumption: 160mA
Input Impedance:  500kOhm
​Output Impedance: 10kOhm

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions.

If an item you receive is faulty get in touch with us ASAP.

Second Hand products come with a 10 day warranty from us. If there is an issue let us know ASAP!

This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment.

Just treat it nice and all will be good!

Please don't email 5 weeks later and say there was an issue within the first 2 days or something like that because we won't be able to cover it.

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 5pm so just call if you need it to leave same day after 2pm.

We ship with Australia Post and a variety of couriers depending on location.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

"LOVE IT Or Exchange It Within 14 Days"!

The item MUST BE sent back in the same condition it arrived in and have all the materials it arrived with (manual,warranty card,all accessories) and be packaged in the original box.

Items returned in undesired condition (scratched,chipped, etc) will be subject to a restocking charge of up to 30%. Modded items will not be refunded!

Postage must be paid by the purchaser to get the item returned to us and we will exchange at our discretion the amount of the products but not the postage costs.

Items must arrive here within 14 days of your order being placed.

Some items cannot be returned like Pedalboards you have already put velcro on, strings, pedalboard tape, Cables and DIY cable kits.

Please don't use the Manufacturers box as the packing box or you will automatically be charged a 30% restocking fee!

Email us BEFORE returning your items so we can resolve or sort out any problems you may have and just so we know to expect the item. You may also want to insure or register your item as we don't take responsibility for lost or damaged post.

Sale

Unavailable

Sold Out