Skip to content

Origin Effects RevivalDRIVE

$829.00
Pre-Order Available
Love it, or swap within 14 days | Free Gravity Pick!
Afterpay
4 interest-free payments of $207.25 More info

Free Shipping for orders over $199

Orders usually arrive in 2 - 3 days

Free if spend over $199. Large Packages excluded

Love it, or swap within 14 days

Don't like what you hear? No worries - swap within 14 days.

Best service in town

4.8 / 5 from over 500+ Google Reviews Buy from the best in AUS.

The RevivalDRIVE is the first overdrive pedal from Origin Effects, the creators of the game-changing Cali76 and SlideRIG compressors. For these pedals, Origin took the legendary Urei 1176 as their inspiration. By following the same analogue circuit topology but adapting the design and components to work in a pedal format, they managed to deliver the sound and response of this classic studio compressor in a stompbox.


For the RevivalDRIVE, they’ve applied the same approach to overdrive. But rather than look at other effects, they’ve gone straight to the source of great overdriven tone – the vintage non-master-volume valve amps of the ‘50s, ‘60s and ‘70s.

The Revival DRIVE houses an unabridged valve amp-style signal path, including the preamp, phase inverter, power amp and rectifier stages, a synthesised mains power signal and a speaker-emulating reactive load.

The footswitchable Valve Rectifier and Silicon Rectifier channels feature a comprehensive array of controls that let you adjust gain, preamp voicing, low-end distortion, presence and clean-to-overdriven break-up characteristics. You can also set how much of the ghosting effect you want and tweak power amp sag characteristics. The pedal features a fully variable, switchable mid-range boost, as well as a blend control that can be used to mix the dry and overdriven signals together.

The RevivalDRIVE also boasts clever EQ compensation features so that the player can adapt the pedal’s output to suit their amp of choice, or even plug straight into a PA or flat-response power amp.

• Dual Class-A preamp stages
• Phase inverter and push-pull power amp stages
• Built-in reactive speaker load
• Solid-state and valve-styled rectifier channels
• Preamp and bright cap voicing switches
• Dry/O.D. blend control
• Fully variable mid boost
• Powerful re-amp EQ
• High-current, low-noise electronics
• Ultra-high input impedance
• Silent switching
• High-quality “signal-conditioning” bypass mode
• Premium components throughout
• Advanced power supply filtering and protection
• PSU Spec. 120mA @ 9V, centre-negative (PSU not included)
• Optional footswitch allows remote mid boost engage and dry blend override
• Designed and built in England

Weight 1200g

Dimensions 160 x 117 x 59mm

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

Videos

The RevivalDRIVE is the first overdrive pedal from Origin Effects, the creators of the game-changing Cali76 and SlideRIG compressors. For these pedals, Origin took the legendary Urei 1176 as their inspiration. By following the same analogue circuit topology but adapting the design and components to work in a pedal format, they managed to deliver the sound and response of this classic studio compressor in a stompbox.


For the RevivalDRIVE, they’ve applied the same approach to overdrive. But rather than look at other effects, they’ve gone straight to the source of great overdriven tone – the vintage non-master-volume valve amps of the ‘50s, ‘60s and ‘70s.

The Revival DRIVE houses an unabridged valve amp-style signal path, including the preamp, phase inverter, power amp and rectifier stages, a synthesised mains power signal and a speaker-emulating reactive load.

The footswitchable Valve Rectifier and Silicon Rectifier channels feature a comprehensive array of controls that let you adjust gain, preamp voicing, low-end distortion, presence and clean-to-overdriven break-up characteristics. You can also set how much of the ghosting effect you want and tweak power amp sag characteristics. The pedal features a fully variable, switchable mid-range boost, as well as a blend control that can be used to mix the dry and overdriven signals together.

The RevivalDRIVE also boasts clever EQ compensation features so that the player can adapt the pedal’s output to suit their amp of choice, or even plug straight into a PA or flat-response power amp.

• Dual Class-A preamp stages
• Phase inverter and push-pull power amp stages
• Built-in reactive speaker load
• Solid-state and valve-styled rectifier channels
• Preamp and bright cap voicing switches
• Dry/O.D. blend control
• Fully variable mid boost
• Powerful re-amp EQ
• High-current, low-noise electronics
• Ultra-high input impedance
• Silent switching
• High-quality “signal-conditioning” bypass mode
• Premium components throughout
• Advanced power supply filtering and protection
• PSU Spec. 120mA @ 9V, centre-negative (PSU not included)
• Optional footswitch allows remote mid boost engage and dry blend override
• Designed and built in England

Weight 1200g

Dimensions 160 x 117 x 59mm

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!