Skip to content

Second Hand Marshall JVM215C 50w Combo

$1,895.00
IN STOCK
Love it, or swap within 14 days

Free Shipping for orders over $199

Orders usually arrive in 2 - 3 days Free if spend over $199

Love it, or swap within 14 days

Don't like what you hear? No worries - swap within 14 days.

Best service in town

4.8 / 5 from over 150+ Google Reviews Buy from the best in AUS.

;

This is one very well kept Marshall JVM Combo! No major signs of use and comes with Footswitch and instruction manuals for amp.and footswitch. Great condition and sounds like a good classic Marshall! These amps sell new for AUD$2600-$2800

Here's what Marshall say:

The Marshall JVM215C all-tube 1 x 12" 50-watt amplifier brings you the full range of Marshall tone, from crisp clean to molten roar! The 2-channel JVM215C gives you six "modes," covering two independent channels with three gain stages, each with its own footswitchable memory. It's a great feature for ultra-flexible onstage switching (via the included dedicated, programmable footswitch unit), plus the primo Celestion G12b speaker provides great tone. Two effects loops, reverb for each channel, a speaker-emulated XLR line out, and two footswitchable master volumes also grace the JVM215C.

CHANNEL SWITCHING AND MORE

The JVM2 series amps don't simply give you footswitchable channels. You get an entire palette brimming with different degrees of distortion, tonality, and effects. The included 4-way switch has five easy-to-read LEDs, making this rig ready for stage use. It's also programmable, so you can set up different combinations of channel, mode (Green, Orange, or Red), reverb level, effects level, and master volume easily. The Parallel/Series effects loops are also switchable on/off. Marshall made sure you'll get the most out of this amp even when your at the front of the stage!

SILENCE IS GOLDEN

When on Standby, the JVM2's emulated XLR output is fully operational, allowing you to record in total silence - a godsend for those late night recording sessions!

MARSHALL HERITAGE

Every JVM2 is made at the Marshall factory in the tonal heart of England. Time-tested, traditional methods of craftsmanship and construction are combined with the latest advances in modern manufacturing technology, ensuring world class build quality and roadworthiness. Internally, the JVM2 circuitry and layout has been kept to a minimum, ensuring the integrity of the guitar tone and an incredibly low noise floor - this coupled with meticulous valve selection and high tolerance, quality components adds to the all-important reliability factor that is synonymous with the Marshall legend.

 

FROM GLASSY TO A ROAR

Two completely independent channels sounds fine, but this amp gives you so much more than that! Each channel features three footswitchable modes: Green, Orange, and Red. These modes give you different voicings and levels of overdrive ranging from pristine clean to super-saturated, harmonic-drenched, sustain-for-days distorted. Of course, the beauty of this configuration is that you can easily dial in these tones and everything in-between, and access them with the touch of a footswitch.

All-tube design: 5 x12AX7, 2 x EL34 (50-watt) or 4 x EL34 (100-watt)

Two totally independent, footswitchable channels - clean/crunch and overdrive

Each channel has three footswitchable modes - Green, Orange, and Red

Each Mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)

Footswitchable, studio-quality digital reverb

Independent reverb controls for both channels

Two footswitchable master volumes

Two effects loops - one series, and one parallel/series

Parallel/series effects loop is footswitchable on/off

Speaker-emulated XLR line out

Programmable 4-way, 5-LED footswitch with memory capabilities

All switching can be done via MIDI

MIDI in and MIDI thru jacks on rear panel

Celestion speakers in combos

Made in England

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

This is one very well kept Marshall JVM Combo! No major signs of use and comes with Footswitch and instruction manuals for amp.and footswitch. Great condition and sounds like a good classic Marshall! These amps sell new for AUD$2600-$2800

Here's what Marshall say:

The Marshall JVM215C all-tube 1 x 12" 50-watt amplifier brings you the full range of Marshall tone, from crisp clean to molten roar! The 2-channel JVM215C gives you six "modes," covering two independent channels with three gain stages, each with its own footswitchable memory. It's a great feature for ultra-flexible onstage switching (via the included dedicated, programmable footswitch unit), plus the primo Celestion G12b speaker provides great tone. Two effects loops, reverb for each channel, a speaker-emulated XLR line out, and two footswitchable master volumes also grace the JVM215C.

CHANNEL SWITCHING AND MORE

The JVM2 series amps don't simply give you footswitchable channels. You get an entire palette brimming with different degrees of distortion, tonality, and effects. The included 4-way switch has five easy-to-read LEDs, making this rig ready for stage use. It's also programmable, so you can set up different combinations of channel, mode (Green, Orange, or Red), reverb level, effects level, and master volume easily. The Parallel/Series effects loops are also switchable on/off. Marshall made sure you'll get the most out of this amp even when your at the front of the stage!

SILENCE IS GOLDEN

When on Standby, the JVM2's emulated XLR output is fully operational, allowing you to record in total silence - a godsend for those late night recording sessions!

MARSHALL HERITAGE

Every JVM2 is made at the Marshall factory in the tonal heart of England. Time-tested, traditional methods of craftsmanship and construction are combined with the latest advances in modern manufacturing technology, ensuring world class build quality and roadworthiness. Internally, the JVM2 circuitry and layout has been kept to a minimum, ensuring the integrity of the guitar tone and an incredibly low noise floor - this coupled with meticulous valve selection and high tolerance, quality components adds to the all-important reliability factor that is synonymous with the Marshall legend.

 

FROM GLASSY TO A ROAR

Two completely independent channels sounds fine, but this amp gives you so much more than that! Each channel features three footswitchable modes: Green, Orange, and Red. These modes give you different voicings and levels of overdrive ranging from pristine clean to super-saturated, harmonic-drenched, sustain-for-days distorted. Of course, the beauty of this configuration is that you can easily dial in these tones and everything in-between, and access them with the touch of a footswitch.

All-tube design: 5 x12AX7, 2 x EL34 (50-watt) or 4 x EL34 (100-watt)

Two totally independent, footswitchable channels - clean/crunch and overdrive

Each channel has three footswitchable modes - Green, Orange, and Red

Each Mode has switch memory (reverb on/off, effects loop on/off, master volume 1 or 2)

Footswitchable, studio-quality digital reverb

Independent reverb controls for both channels

Two footswitchable master volumes

Two effects loops - one series, and one parallel/series

Parallel/series effects loop is footswitchable on/off

Speaker-emulated XLR line out

Programmable 4-way, 5-LED footswitch with memory capabilities

All switching can be done via MIDI

MIDI in and MIDI thru jacks on rear panel

Celestion speakers in combos

Made in England

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!