BRISBANE (07) 3892 3292

Sinvertek Fluid Time MkII Analog Delay


or make 4 interest-free payments of $64.75 fortnightly with Afterpay More info

The BBD analog delay is loved by many people, its tone is not only warm, but also misty and hazy. This unique sound is what a lot of us guitarists are after! Always looking for that signature 80’s sound that appeared in so many classic riffs and solos.. The first...


The BBD analog delay is loved by many people, its tone is not only warm, but also misty and hazy. This unique sound is what a lot of us guitarists are after! Always looking for that signature 80’s sound that appeared in so many classic riffs and solos..

The first generation of this delay was released in 2011, after several years of continuous development, we have upgraded the tone quality and perfected the functions, we also added the external control to extend the applicable dimensions. The FLUID TIME MK II is the second generation, and it was released in 2016. 

The tone of the FLUID TIME MK II perfectly preserves the traditional features of Bucket Brigade Device(BBD), it is warm and hoarse and full of analog taste. More significantly, the tone is not only very clear but also absolutely muffled. The FLUID TIME MK II features the unique delay structure, it is equipped with 5x reissued MN3208 BBD chips, the delay time reaches to 700ms. This is a relatively long delay time, it can give you more creative possibilities, and it gives the FLUID TIME MK II the ability to be more widely used.

The FLUID TIME MK II is a pure analogue delay, controlled by a micro controller. The signal path is an all analog circuit, this design ensures the perfect tone quality. In analog circuit part, this pedal has a super buffer circuit, it can be used to buffer the original signal. During the performance and rehearsal, even facing the most complex interference, the signal still remains very pure, it will not lose the top end of the sustain.

The control part of FLUID TIME MK II is consist of digital signal controllers, compared with the traditional BBD analog delay, this pedal has a great breakthrough in use. Same as the digital delay, the FLUID TIME MK II also features the TAP TAMPO and TAP DIVISION function. When using TAP TAMPO function, you can get a LO-FI BBD delay signal with the delay time of up to 2s. When using TAP DIVISION function, you can divide the current delay time to other beats.

Furthermore, except the common TRUE BYPASS and BUFFER BYPASS, the FLUID TIME MK II is also equipped with TRAIL BYPASS.

The FLUID TIME MK II also has an FX LOOP in the effect path, you can add any effects which you need in the loop, such as chorus, wah, flanger, and so on. This makes for some awesome combos and interesting sounds!

In addition to the normal mode, the FLUID TIME MK II has 3 special working modes, they are, DUAL TIME mode, TAKE OFF mode and STEP OVER mode. When working in the DUAL TIME mode, you can set up 2 fixed delay times, and while playing you can freely switch between these 2 delay times. When working in the TAKE OFF mode, you can get an amazing oscillating effect caused by the increased feedback. The STEP OVER is a strange effect, like aliens are talking! Both TAKE OFF and STEP OVER can give you some unique tones.

The FLUID TIME MK II has powerful external control functions. By connecting a CTRL/CV JACK, you can control and switch the BYPASS, TAP TAMPO and special working modes. You can also connect CV a pedal or generator (most midi controllers will send CV Controls) to adjust the delay time, auto trigger the special working modes and adjust the parameters of special working modes.

In order to ensure the professional tone and unsurpassed reliability, we chose a military-level PCB and high quality components.

The FLUID TIME MK II specifically designed for the professional guitarists and senior equipment specialists and enthusiasts

 Perfectly reproducting the classic 80's analog delay tone

 Warm and clear tone.

 Unique structure, equipped with 5 reissued 3208 BBD chips

 The delay time up to 700ms

 Pure Analog Signal Path (original & delay signal)

 Equipped with a buffer circuit, well maintain the top end of the sustain


 3 ways of bypass, Ture Bypass, Buffer Bypass & Trails Bypass

 Equipped FX LOOP in the delay signal path

 Multifunction & multiplexing knobs

 3 special working modes, DUAL TIME, STEP OVER, TAKE OFF

 DUAL TIME mode, can be swithed between the 2 preset delay times

 TAKE OFF mode, making the feedback to max at a preset delay time

 STEP OVER mode, converting between several different delay times

 Connect external control units to control BYPASS type & TAP function

 Connect external control units to activate the special working mode

 Connect CV signal to control delay time

 Connect CV signal to adjust the parameters of special working mode

 Connect CV signal to automatically trigger the special working mode

 Military - level PCB

 High quality electronic components

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions.

If an item you receive is faulty get in touch with us ASAP.

Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP!

This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment.

Just treat it nice and all will be good!

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

"LOVE IT Or Exchange It Within 14 Days"!

The item MUST BE sent back in the same condition it arrived in and have all the materials it arrived with (manual,warranty card,all accessories) and be packaged in the original box.

Items returned in undesired condition (scratched,chipped, etc) will be subject to a restocking charge of up to 30%. Modded items will not be refunded!

Postage must be paid by the purchaser to get the item returned to us and we will exchange at our discretion the amount of the products but not the postage costs.

Items must arrive here within 14 days of your order being placed.

Some items cannot be returned like Pedalboards you have already put velcro on, strings, pedalboard tape, Cables and DIY cable kits.

Please don't use the Manufacturers box as the packing box or you will automatically be charged a 30% restocking fee!

Email us BEFORE returning your items so we can resolve or sort out any problems you may have and just so we know to expect the item. You may also want to insure or register your item as we don't take responsibility for lost or damaged post.

You Might Like



Sold Out