The IICP Module is Synergy’s tribute to one of the most iconic tone machines ever created. For all the continuing development and refinement of modern multi-featured amps, the original Mark series amp this module is based on is still one of the most sought after and hotly discussed guitar amplifiers around.
In the early days of boutique amp development, Steve Fryette worked at Valley Arts Guitars, then the Los Angeles epicenter of high-performance guitar and amplifier expertise. It was there that Steve got first-hand experience with the evolution of this ground-breaking amplifier so, it was a natural fit for Synergy to invite Steve, who was instrumental in the development of Synergy systems already, to design this module. Armed with intimate insight and a passion for perfection, Steve applies a singular focus on the true essence of this legendary amp.
DUAL CHANNEL TUBE PREAMP MODULE
The Synergy IICP module captures the original amplifier’s Fullerton inspired cleans and distinctive mid saturated overdrive. Its dual-channel design provides instant switching access to some of the most lauded sounds in hard rock history. The amp’s brite and shift controls are present and accounted for, as is the switchable 5-band EQ. From powerful low-end girth to sparkling harmonics, the IICP delivers a surprisingly broad sonic pallet in an ultra-convenient, all-tube module.
For vintage Mark series fans, the Synergy IICP preamp module leaves no sonic stone unturned.
CATHODE SELECT FUNCTION:
Many of the new Synergy modules come equipped with a 3-position switch that allows you to configure the input tubes overall response to match the original circuit of the selected module. The IICP module differs from this arrangement in that it automatically selects between the two profiles that ideally match the intended performance of each channel. This ensures that each channel mode will exhibit the feel and tonal balance that the amplifier this is based on is known for.
TECHNICAL
- Built in U.S.A.
- All-tube preamp module custom designed by Steven Fryette
- Two channels offer a full range of Clean, Overdrive and High-Gain Distortion sounds
- Clean Channel – Volume and Master controls, Brite & Shift Switches
- Lead Channel – Lead Gain and Lead Volume controls, Lead Brite & Lead Shift switches
- Shared Treble, Middle, Bass and Presence controls
- Five-Band Graphic EQ with Auto Assign switch
- 2 x 12AX7 preamp tubes ensure rich harmonic performance
- Easy to install and remove from Synergy preamp docks
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
The IICP Module is Synergy’s tribute to one of the most iconic tone machines ever created. For all the continuing development and refinement of modern multi-featured amps, the original Mark series amp this module is based on is still one of the most sought after and hotly discussed guitar amplifiers around.
In the early days of boutique amp development, Steve Fryette worked at Valley Arts Guitars, then the Los Angeles epicenter of high-performance guitar and amplifier expertise. It was there that Steve got first-hand experience with the evolution of this ground-breaking amplifier so, it was a natural fit for Synergy to invite Steve, who was instrumental in the development of Synergy systems already, to design this module. Armed with intimate insight and a passion for perfection, Steve applies a singular focus on the true essence of this legendary amp.
DUAL CHANNEL TUBE PREAMP MODULE
The Synergy IICP module captures the original amplifier’s Fullerton inspired cleans and distinctive mid saturated overdrive. Its dual-channel design provides instant switching access to some of the most lauded sounds in hard rock history. The amp’s brite and shift controls are present and accounted for, as is the switchable 5-band EQ. From powerful low-end girth to sparkling harmonics, the IICP delivers a surprisingly broad sonic pallet in an ultra-convenient, all-tube module.
For vintage Mark series fans, the Synergy IICP preamp module leaves no sonic stone unturned.
CATHODE SELECT FUNCTION:
Many of the new Synergy modules come equipped with a 3-position switch that allows you to configure the input tubes overall response to match the original circuit of the selected module. The IICP module differs from this arrangement in that it automatically selects between the two profiles that ideally match the intended performance of each channel. This ensures that each channel mode will exhibit the feel and tonal balance that the amplifier this is based on is known for.
TECHNICAL
- Built in U.S.A.
- All-tube preamp module custom designed by Steven Fryette
- Two channels offer a full range of Clean, Overdrive and High-Gain Distortion sounds
- Clean Channel – Volume and Master controls, Brite & Shift Switches
- Lead Channel – Lead Gain and Lead Volume controls, Lead Brite & Lead Shift switches
- Shared Treble, Middle, Bass and Presence controls
- Five-Band Graphic EQ with Auto Assign switch
- 2 x 12AX7 preamp tubes ensure rich harmonic performance
- Easy to install and remove from Synergy preamp docks
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Related Products
-
$409.00Benson call this a Preamp because it is! The circuit is based on the Chimera 30 watt guitar amplifier, but substitutes FET transistors for the vacu...
View full details$409.00 -
SOLD OUT
$599.00The EBS MicroBass 3 is a 2-channel preamp, built exclusively with premium components. It is engineered by EBS in Sweden with technologies from the...
View full details$599.00 -
$1,579.00The all-rounder of the Victory V4 amp range, the Jack is the amp we developed with ‘Guthrie Govan’. Four valves in the front end, 180-watt power s...
View full details$1,579.00 -
$2,299.00So simple, so compelling: vintage-style American cleans through to vintage British break-up – and great with pedals, too!This single-channel, all-...
View full details$2,299.00
