Collision Devices Nocturnal
Looking for an ambient and textures creation box?
As huge fans of cinematic atmospheric soundtracks and ambiences we wanted to develop a pedal made for soundscapes creation.
It's composed of a Shimmer Reverb, a Dynamic Tremolo and a Modulated Delay.
Each effect can be used together or separately and has its own momentary or trails function.
Pass from the Dusk, through the Night to the Dawn with the Nocturnal.
Completely built in France. From the enclosure to the circuit. Assembled by hand in our workshop.
The Nocturnal has a lifetime warranty. Of course.
DUSK
Modulated Delay
Warmed and inspirational delay based on a tape delay circuit.
Settings :
Mix : Controls the mix between Full Dry or 50% Dry / 50% Wet
Time : Time between each repetition. From a few ms to 1 second. Signal quality turns to Lo-Fi when it’s pushed to long repeats.
Feedback : Number of repetitions. Able to self oscillate very easily when the knob is around 7.5.
Modulation : Amount of modulation in the delay repetitions. Create a sort of old tape effect
Speed : Modulation’s frequency from 0.1 to 20 Hz.
Momentary effect : Feedback self oscillation when footswitch is long pushed
NIGHT
Dynamic Tremolo
Turn a huge amount of shimmer and reverb into it to make it oscillate faster.
Settings :
Sensibilty : Sensibility, turn it clockwise to make the tremolo more sensitive to your attack
Depth : Controls the tremolo’s volume
Momentary effect : Tremolo overspeed when footswitch is long pushed
DAWN
Shimmer
Create bright soundscapes and loose the notion of time until the sunrise.
Settings :
Blend : Controls the amount of Dry/Wet signal. You can have a full Wet reverb.
Reverb : Reverberation time. Max 15 sec.
Shimmer : Makes the reverb shimmer
Filter : Digital filter. Low pass. Lets you make the shimmer darker or more shiny
Colour : Notch active and analog filter around 2.2 kHz. Controls the Q of the filter.
Trails : when footswitch is long pushed, the trails are activated and it allows you to play with the dry signal with the shimmer trails
-
Maximum current draw
400 mA
-
Imput Impedance
1 MOhm
-
Size 186 x 119 x 56mm
-
The use of an isolated power supply is recommended for powering all Collision devices Pedals.
-
Power supply not included.
-
The pedal is buffered bypass
-
Voltage
+9V DC (négative center)
-
Output Impedance
10 KOhm
-
Weight
250gr
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Videos
Looking for an ambient and textures creation box?
As huge fans of cinematic atmospheric soundtracks and ambiences we wanted to develop a pedal made for soundscapes creation.
It's composed of a Shimmer Reverb, a Dynamic Tremolo and a Modulated Delay.
Each effect can be used together or separately and has its own momentary or trails function.
Pass from the Dusk, through the Night to the Dawn with the Nocturnal.
Completely built in France. From the enclosure to the circuit. Assembled by hand in our workshop.
The Nocturnal has a lifetime warranty. Of course.
DUSK
Modulated Delay
Warmed and inspirational delay based on a tape delay circuit.
Settings :
Mix : Controls the mix between Full Dry or 50% Dry / 50% Wet
Time : Time between each repetition. From a few ms to 1 second. Signal quality turns to Lo-Fi when it’s pushed to long repeats.
Feedback : Number of repetitions. Able to self oscillate very easily when the knob is around 7.5.
Modulation : Amount of modulation in the delay repetitions. Create a sort of old tape effect
Speed : Modulation’s frequency from 0.1 to 20 Hz.
Momentary effect : Feedback self oscillation when footswitch is long pushed
NIGHT
Dynamic Tremolo
Turn a huge amount of shimmer and reverb into it to make it oscillate faster.
Settings :
Sensibilty : Sensibility, turn it clockwise to make the tremolo more sensitive to your attack
Depth : Controls the tremolo’s volume
Momentary effect : Tremolo overspeed when footswitch is long pushed
DAWN
Shimmer
Create bright soundscapes and loose the notion of time until the sunrise.
Settings :
Blend : Controls the amount of Dry/Wet signal. You can have a full Wet reverb.
Reverb : Reverberation time. Max 15 sec.
Shimmer : Makes the reverb shimmer
Filter : Digital filter. Low pass. Lets you make the shimmer darker or more shiny
Colour : Notch active and analog filter around 2.2 kHz. Controls the Q of the filter.
Trails : when footswitch is long pushed, the trails are activated and it allows you to play with the dry signal with the shimmer trails
-
Maximum current draw
400 mA
-
Imput Impedance
1 MOhm
-
Size 186 x 119 x 56mm
-
The use of an isolated power supply is recommended for powering all Collision devices Pedals.
-
Power supply not included.
-
The pedal is buffered bypass
-
Voltage
+9V DC (négative center)
-
Output Impedance
10 KOhm
-
Weight
250gr
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Related Products
-
$639.00ROOMS is a stereo, multi function digital reverb capable of searing volume, gated walls of sound, and long, trailing reverberant ambiances with an...
View full details$639.00
