Skip to content
Collision Devices - SINGULARITY (WHITE)

Collision Devices - SINGULARITY (WHITE)

by Collision Devices
$329.00
IN STOCK
Love it, or swap within 14 days | Free Gravity Pick!
Afterpay
4 interest-free payments of $82.25 More info

Free Shipping for orders over $199

Orders usually arrive in 2 - 3 days Free if spend over $199

Love it, or swap within 14 days

Don't like what you hear? No worries - swap within 14 days.

Best service in town

4.8 / 5 from over 150+ Google Reviews Buy from the best in AUS.

;

**WHITE VARIANT**

SINGULARITY - It is basically the fuzz section from the Black Hole Symmetry taken apart. There is a single output volume control. It is loud and sounds huge.
We added a toggle switch to cut the output Low Pass at 3 different frequencies :

720Hz, 2,3kHz, 16kHz

The signal passes through a JFET transistor and 3 silicon transistors to end up being destroyed.
Completely built in France. From the enclosure to the circuit. Assembled by hand in our workshop.

Lifetime warranty.”

 

  • Gain : Placed after the Jfet transistor input stage and followed by silicon gain and clipping stages. 

  • Master : Master volume. 

  • CutOff : This fader controls the cutoff frequency of the MS-20 style low pass filter. Based on a LM13700 stage. Goes from 15Hz to 44kHz. 

  • Resonance : Increases the intensity of the signal around the cutoff frequency.

  • LPF VOL : VCA - sets the output volume of the filter. Pretty useful to adjust the filter to your setup.

  • 2p/4p toggle switch : Select the attenuation curve. Cut at -12dB/octave (2p) or at -24dB/octave (4p). 

  • Add Fuzz (On/Off) toggle switch :  Add an extra unfiltered fuzz signal. The result is louder and creates cool frequencies boost or cut depending on the cutoff position.

  • Serial - // toggle switch : Put the fuzz through the filter - or use both effects in //. 

  • Expression/CV : The Expression/CV control is linked to the cutoff fader. The cutoff fader value sets the lowest value the EXP pedal can go. 

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

Videos

**WHITE VARIANT**

SINGULARITY - It is basically the fuzz section from the Black Hole Symmetry taken apart. There is a single output volume control. It is loud and sounds huge.
We added a toggle switch to cut the output Low Pass at 3 different frequencies :

720Hz, 2,3kHz, 16kHz

The signal passes through a JFET transistor and 3 silicon transistors to end up being destroyed.
Completely built in France. From the enclosure to the circuit. Assembled by hand in our workshop.

Lifetime warranty.”

 

  • Gain : Placed after the Jfet transistor input stage and followed by silicon gain and clipping stages. 

  • Master : Master volume. 

  • CutOff : This fader controls the cutoff frequency of the MS-20 style low pass filter. Based on a LM13700 stage. Goes from 15Hz to 44kHz. 

  • Resonance : Increases the intensity of the signal around the cutoff frequency.

  • LPF VOL : VCA - sets the output volume of the filter. Pretty useful to adjust the filter to your setup.

  • 2p/4p toggle switch : Select the attenuation curve. Cut at -12dB/octave (2p) or at -24dB/octave (4p). 

  • Add Fuzz (On/Off) toggle switch :  Add an extra unfiltered fuzz signal. The result is louder and creates cool frequencies boost or cut depending on the cutoff position.

  • Serial - // toggle switch : Put the fuzz through the filter - or use both effects in //. 

  • Expression/CV : The Expression/CV control is linked to the cutoff fader. The cutoff fader value sets the lowest value the EXP pedal can go. 

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

Related Products