Skip to content

Electronic Audio Experiments Hypersleep V2

$639.00
Sold out
Love it, or swap within 14 days | Free Gravity Pick!
Afterpay
4 interest-free payments of $159.75 More info

Free Shipping for orders over $199

Orders usually arrive in 2 - 3 days Free if spend over $199

Love it, or swap within 14 days

Don't like what you hear? No worries - swap within 14 days.

Best service in town

4.8 / 5 from over 150+ Google Reviews Buy from the best in AUS.

;

The Electronic Audio Experiments Hypersleep is a solid-state analog reverberator. It evokes the immediate acoustic reflections of metal and tile, with a gritty timbre and a ringing, fluttering decay—forgoing epic atmospherics in favor of liminality. 

At the heart of the Hypersleep is the unusual and obsolete MN3011 bucket brigade device. Unlike other BBDs with one input and one output, the MN3011 uses an array of staggered delay outputs to produce a smeared-out echo. Feeding this echo back upon itself produces a reverberant texture. The reverb length can be modulated via the onboard LFO for atypical chorus and vibrato effects, or the haunting sound of a room changing size in real time. As always, careful signal conditioning ensures that Hypersleep is friendly to any instrument or line level signal source.  

Controls

  • Level: overall effect level, gracefully overloads at higher settings

  • Space: delay time of the BBD, simultaneously controlling six taps on a single delay line

  • Mix: blend of clean and effected signals, from full dry to full wet

  • Feedback: increases the decay time of the reverb; will self-oscillate at extreme settings

  • Rate: modulation rate, from imperceptibly slow to nearly audio rates

  • Depth: modulation depth, from subtle vibrato to warped pitch bending

Changelog

Version 2 (Fall 2021)

  • Updated filter scheme for improved bandwidth and clock suppression

  • Minor changes to feedback, for a less “boomy” low end response

  • Optimized power supply for reduced current draw and background noise

  • Bypass relay replaced with silent electronic switch

Electrical Specifications

Bypass: Electronic switching with FET-input op amp bypass buffer

Input impedance @ 1Khz: 1MΩ

Output impedance @ 1Khz: <1kΩ

Power: 9VDC, 2.1mm center negative barrel. The current draw is 60mA.

We recommend a regulated, isolated power supply rated for 100mA minimum. The DC input is protected against reverse polarity and over-voltage up to 24V. Our pedals do not accept batteries.

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

The Electronic Audio Experiments Hypersleep is a solid-state analog reverberator. It evokes the immediate acoustic reflections of metal and tile, with a gritty timbre and a ringing, fluttering decay—forgoing epic atmospherics in favor of liminality. 

At the heart of the Hypersleep is the unusual and obsolete MN3011 bucket brigade device. Unlike other BBDs with one input and one output, the MN3011 uses an array of staggered delay outputs to produce a smeared-out echo. Feeding this echo back upon itself produces a reverberant texture. The reverb length can be modulated via the onboard LFO for atypical chorus and vibrato effects, or the haunting sound of a room changing size in real time. As always, careful signal conditioning ensures that Hypersleep is friendly to any instrument or line level signal source.  

Controls

  • Level: overall effect level, gracefully overloads at higher settings

  • Space: delay time of the BBD, simultaneously controlling six taps on a single delay line

  • Mix: blend of clean and effected signals, from full dry to full wet

  • Feedback: increases the decay time of the reverb; will self-oscillate at extreme settings

  • Rate: modulation rate, from imperceptibly slow to nearly audio rates

  • Depth: modulation depth, from subtle vibrato to warped pitch bending

Changelog

Version 2 (Fall 2021)

  • Updated filter scheme for improved bandwidth and clock suppression

  • Minor changes to feedback, for a less “boomy” low end response

  • Optimized power supply for reduced current draw and background noise

  • Bypass relay replaced with silent electronic switch

Electrical Specifications

Bypass: Electronic switching with FET-input op amp bypass buffer

Input impedance @ 1Khz: 1MΩ

Output impedance @ 1Khz: <1kΩ

Power: 9VDC, 2.1mm center negative barrel. The current draw is 60mA.

We recommend a regulated, isolated power supply rated for 100mA minimum. The DC input is protected against reverse polarity and over-voltage up to 24V. Our pedals do not accept batteries.

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!