Four independent control ports interface to your devices, and new user-accessible configuration switches make setup easier than ever.

Each control port may be set to one of four output modes, selectable using the DIP switches on the face of the MIDI Box 4.2

Tip Active:. Suits Strymon, Alexander, Meris, Empress, Bondi, and other devices using voltage mode on the jack tip
Ring Active:  Suits Chase Bliss Audio and other devices using voltage mode on the jack ring
TRS MIDI TYPE A:  Sets the tip active and pulls the ring terminal high, for use with Boss, EAE, Jackson, and other devices that conform to the MIDI TRS specification.  Also works with our MJ-5P MultiJack to MIDI cable to provide additional standard MIDI outputs from the MIDI Box 4.2
TRS MIDI TYPE B: Alternate wiring option, most commonly used by European makers. Sends signal on the jack ring, pulls the jack tip high. Suits Darkglass, Arturia, 1010 Music, many modular synths.
Tip and Ring Active:  Provides separate outputs on tip and ring of the control port, enabling two MIDI outputs using our TRS Insert Cable Not shown on enclosure, set TH & RH OFF, R & T ON.

Power:  Requires 9-12v DC input, 50mA maximum.

Status LED:  Lights blue when powered, blinks red when MIDI data is received.  Constant high-speed MIDI data such as MIDI Clock may cause the LED to remain violet.

MIDI THRU:  Dedicated hardware MIDI Thru, repeats any MIDI data received to send to your other MIDI devices.  You can chain multiple MIDI Box 4 units by linking the MIDI THRU from the first box to the MIDI IN of the next and so on.

Chase Bliss Audio:  All current pedals.  Connect with TRS cable, set port to RING ACTIVE.

• Ayahuasca

• Bliss Factory

• Blooper

• Brothers

• Condor

• Dark World

• Generation Loss, Generation Loss mkkII

• Gravitas

• Habit

• Lost & Found

• MOOD, MOOD mkII

• Onward

• Reverse Mode C

• Spectre (all versions)

• Thermae

• Tonal Recall (blue and RKM)

• Warped Vinyl Mk1 (supports MIDI clock only)

• Warped Vinyl Mk2 and HiFi

• Wombtone Mk1 (supports MIDI clock only)

• Wombtone Mk2

Meris: All current pedals using 1/4” MIDI.  Connect with mono / TS cable.  Set port to TIP ACTIVE.

• Enzo

• Hedra

• Mercury 7

• Ottobit Jr

• Polymoon

Boss:  All 200-series pedals with 1/8″ MIDI jacks.  Use TRS / stereo cable.  Set port to TRS MIDI TYPE A.

• DD-200

• OD-200

• EQ-200

• MD-200

• All other pedals with 1/8” MIDI or SYNC IN jacks including SL-2, SDE-2, RE-2, others.

Jackson Audio:  All MIDI-compatible pedals.  Use TRS / stereo cable.  Set port to TRS MIDI TYPE A.

• Golden Boy

• Broken Arrow v2

• Bloom v2

• Asabi
  

Alexander Pedals:  Connect with mono / TS cable.  Set port to TIP ACTIVE.

• ALL NEO SERIES PEDALS (Colour Theory, Defender, F.13 Neo, History Lesson Vol.3, Marshmallow, Quadrant, Radical Delay DX, Sky 5000, Space Race, Sugarcube, Super Neo-Matic, Superball, Syntax Error, Wavelength)

• ALL LEAP SERIES PEDALS (Space Force, Rewind, Luminous, Dynaflanger 213, Syntax Error XP)

• ALL VENTURE SERIES PEDALS (Syntax Error 2, Faver Pitch)

• Forget-Me-Not, Now We Are Ghosts

Empress Effects:  Connect with mono / TS cable.  Set port to TIP ACTIVE

• Echosystem

• Phaser

• Tremolo 2

• Reverb

• ZOIA

Swindler Effects:  All MIDI-compatible pedals.  Use TRS / stereo cable.  Set port to TRS MIDI TYPE A.

• The Gulf v2

• Red Mountain v2

Cooper FX:  All MIDI-compatible pedals.  Use TRS / stereo cable.  Set port to TRS MIDI TYPE A.

• Outward v2

• Arcades

Neunaber Effects:  MIDI-compatible pedals with 1/8″ TRS jacks.  Use  TRS / stereo cable.  Set port to TRS MIDI TYPE A.

• Neuron

• All pedals using 1/8” MIDI input

Bondi Effects:  Connect with mono / TS cable.  Set port to TIP ACTIVE.

• Art Van Delay

Darkglass: All pedals using 1/8” for MIDI input, set port to TRS TYPE B

Strymon: All V2 pedals using 1/4” for MIDI input, set port to TIP ACTIVE

• El Cap V2

• BlueSky V2

• Zelzah

• Cloudburst

• EC-1

• Flint V2

• NOTE: V1 pedals don’t support MIDI!