Skip to content

Crowther Audio HotCake V2

$269.00
Sold out
Love it, or swap within 14 days | Free Gravity Pick!
Afterpay
4 interest-free payments of $67.25 More info

Free Shipping for orders over $199

Orders usually arrive in 2 - 3 days Free if spend over $199

Love it, or swap within 14 days

Don't like what you hear? No worries - swap within 14 days.

Best service in town

4.8 / 5 from over 150+ Google Reviews Buy from the best in AUS.

;

This is the V2 Version of the incredible Hotcake by Crowther Audio!

With the new version comes with a few different flavours (or condiments) to sink your teeth into!

The +CREAM setting is a bit smoother than the Bluesberry setting (available as a dip switch inside V1), and is now accessible from the outside. 

The XLF eXtended Low Frequency setting allows more low end through, perfect of for bass and 7 string guitars. This acts as in the same way the "Bass" Dip Switch did internally on the V1. Without it engaged, the low end has a gentle roll off just below the low E on a guitar to reduce any sub harmonic products from heavy guitar chords which may be hard going for a smaller guitar amp. 

The Hotcake was first produced in 1976, while Paul Crowther was in the UK with the band, Split Enz. The Hotcake is designed to leave the undistorted component of the guitar sound unchanged, while providing a nice fat distortion sound without resorting to a treble cut circuit which will also affect the guitar tonality. With the Drive and Presence controls set to minimum, and the Level at around 2 o'clock, you should be hard pressed to hear any change in the sound at all when you switch the Hotcake in and out. You can get a clean volume boost by increasing the Level control. Increasing the Drive will give you a thick distortion sound with a little bit of edge to it, and the Presence control adds some mid-range punch to the sounds. The Hot cake also handles chords well. It is recommended that the Hotcake is patched between the guitar and amplifier, rather than into an amplifier's effect loop. Generally speaking, if you are happy with your guitar and amplifier combination, the Hotcake will work well as a primary distortion.

As of September 2007, The Hotcake only came in one version, and was internally presettable for "Normal" or "Bluesberrry" voicings, and also for the extended low frequency option for bass. This is now externally accessible on the new version! For reference to the +CREAM setting, the "Bluesberry" voicing of the Hotcake had a slightly less buzzy edge at the onset of distortion. 

 

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

Videos

This is the V2 Version of the incredible Hotcake by Crowther Audio!

With the new version comes with a few different flavours (or condiments) to sink your teeth into!

The +CREAM setting is a bit smoother than the Bluesberry setting (available as a dip switch inside V1), and is now accessible from the outside. 

The XLF eXtended Low Frequency setting allows more low end through, perfect of for bass and 7 string guitars. This acts as in the same way the "Bass" Dip Switch did internally on the V1. Without it engaged, the low end has a gentle roll off just below the low E on a guitar to reduce any sub harmonic products from heavy guitar chords which may be hard going for a smaller guitar amp. 

The Hotcake was first produced in 1976, while Paul Crowther was in the UK with the band, Split Enz. The Hotcake is designed to leave the undistorted component of the guitar sound unchanged, while providing a nice fat distortion sound without resorting to a treble cut circuit which will also affect the guitar tonality. With the Drive and Presence controls set to minimum, and the Level at around 2 o'clock, you should be hard pressed to hear any change in the sound at all when you switch the Hotcake in and out. You can get a clean volume boost by increasing the Level control. Increasing the Drive will give you a thick distortion sound with a little bit of edge to it, and the Presence control adds some mid-range punch to the sounds. The Hot cake also handles chords well. It is recommended that the Hotcake is patched between the guitar and amplifier, rather than into an amplifier's effect loop. Generally speaking, if you are happy with your guitar and amplifier combination, the Hotcake will work well as a primary distortion.

As of September 2007, The Hotcake only came in one version, and was internally presettable for "Normal" or "Bluesberrry" voicings, and also for the extended low frequency option for bass. This is now externally accessible on the new version! For reference to the +CREAM setting, the "Bluesberry" voicing of the Hotcake had a slightly less buzzy edge at the onset of distortion. 

 

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!