Second Hand T-Rex Replica Delay Pedal
It is hard to believe, that this delay pedal is digital. It gives the warmth of all-tube echo and also cool digital delay in studio quality. All with the convenience of one pedal.
TIME, REPEAT, MIX and LEVEL knobs allow for quick, precise control. A Hi-cut button (brown) cuts high frequencies on repeats - perfectly simulating the tone of a 60s era tape echo.
With a simple flick of a switch you can alter the delay's subdivision parameter from 1/4 to 1/8 triplets, and to make the delay fit your purpose we even added a Tap-Tempo switch to get you right in time with your tune.
The T-Rex Replica is a digital delay pedal designed to deliver studio-quality digital delay alongside the vintage warmth associated with all-tube and tape echo effects, combined in a single stompbox format. Although fully digital in operation, the Replica is widely described as sounding analog in character, with a warm, smooth response intended to emulate classic echo units from the 1950s and 1960s while retaining modern precision and control.
The pedal is built around a hybrid analog and digital signal path that uses two Burr Brown 24-bit converters, one A/D and one D/A, operating at a high 200 kHz sample rate, while the remainder of the circuitry remains analog. This design allows the Replica to offer clear, high-fidelity delay repeats while maintaining a tubey, natural decay that integrates easily with a guitar signal.
The Replica provides extensive tempo and rhythmic control through a combination of manual adjustment, tap tempo, and selectable subdivisions. Delay time can be set using a dedicated Tempo knob or entered in real time via the tap tempo footswitch, allowing the effect to stay synchronized with changes in song tempo during performance. A Subdivision function enables quarter-note triplet delays derived from the tapped or dialed-in tempo, adding rhythmic flexibility without complex programming. A dedicated Brown switch applies a high-cut filter to the repeats only, reducing high-frequency content to simulate the darker, compressed character of vintage tape echo units.
Controls
- Echo: Controls the mix between the dry signal and the delayed signal, ranging from dry-only to delay-only output.
- Repeat: Sets the number of delay repetitions, from a single repeat to near-infinite feedback.
- Tempo: Adjusts the delay time manually, with a range from approximately 12 ms to 1500 ms.
- Level: Controls the overall output volume, providing up to approximately 3 dB of boost.
- Tap Tempo Footswitch: Allows delay time to be set by tapping the desired tempo during performance.
- Subdivision Switch: Engages quarter-note triplet subdivision based on the tapped or set tempo.
- Brown Switch: Activates a high-cut filter on delay repeats to produce a warmer, tape-style echo sound.
- Input Level: Adjusts input sensitivity to prevent overload when used with strong signals or in effects loops.
- Bypass Footswitch: Engages or disengages the effect using true hardwire bypass.
Connections
- Input: 6.3 mm jack for guitar or line-level signals.
- Output: 6.3 mm jack carrying the delayed signal.
- Direct Output: 6.3 mm jack providing an unprocessed dry signal.
- MIDI In: 5-pin DIN connector for external control of tap tempo and bypass functions.
- Power Input: External 12 V AC or DC power connection.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Videos
Second Hand T-Rex Replica Delay Pedal
It is hard to believe, that this delay pedal is digital. It gives the warmth of all-tube echo and also cool digital delay in studio quality. All with the convenience of one pedal.
TIME, REPEAT, MIX and LEVEL knobs allow for quick, precise control. A Hi-cut button (brown) cuts high frequencies on repeats - perfectly simulating the tone of a 60s era tape echo.
With a simple flick of a switch you can alter the delay's subdivision parameter from 1/4 to 1/8 triplets, and to make the delay fit your purpose we even added a Tap-Tempo switch to get you right in time with your tune.
The T-Rex Replica is a digital delay pedal designed to deliver studio-quality digital delay alongside the vintage warmth associated with all-tube and tape echo effects, combined in a single stompbox format. Although fully digital in operation, the Replica is widely described as sounding analog in character, with a warm, smooth response intended to emulate classic echo units from the 1950s and 1960s while retaining modern precision and control.
The pedal is built around a hybrid analog and digital signal path that uses two Burr Brown 24-bit converters, one A/D and one D/A, operating at a high 200 kHz sample rate, while the remainder of the circuitry remains analog. This design allows the Replica to offer clear, high-fidelity delay repeats while maintaining a tubey, natural decay that integrates easily with a guitar signal.
The Replica provides extensive tempo and rhythmic control through a combination of manual adjustment, tap tempo, and selectable subdivisions. Delay time can be set using a dedicated Tempo knob or entered in real time via the tap tempo footswitch, allowing the effect to stay synchronized with changes in song tempo during performance. A Subdivision function enables quarter-note triplet delays derived from the tapped or dialed-in tempo, adding rhythmic flexibility without complex programming. A dedicated Brown switch applies a high-cut filter to the repeats only, reducing high-frequency content to simulate the darker, compressed character of vintage tape echo units.
Controls
- Echo: Controls the mix between the dry signal and the delayed signal, ranging from dry-only to delay-only output.
- Repeat: Sets the number of delay repetitions, from a single repeat to near-infinite feedback.
- Tempo: Adjusts the delay time manually, with a range from approximately 12 ms to 1500 ms.
- Level: Controls the overall output volume, providing up to approximately 3 dB of boost.
- Tap Tempo Footswitch: Allows delay time to be set by tapping the desired tempo during performance.
- Subdivision Switch: Engages quarter-note triplet subdivision based on the tapped or set tempo.
- Brown Switch: Activates a high-cut filter on delay repeats to produce a warmer, tape-style echo sound.
- Input Level: Adjusts input sensitivity to prevent overload when used with strong signals or in effects loops.
- Bypass Footswitch: Engages or disengages the effect using true hardwire bypass.
Connections
- Input: 6.3 mm jack for guitar or line-level signals.
- Output: 6.3 mm jack carrying the delayed signal.
- Direct Output: 6.3 mm jack providing an unprocessed dry signal.
- MIDI In: 5-pin DIN connector for external control of tap tempo and bypass functions.
- Power Input: External 12 V AC or DC power connection.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!