US Purveyors of classy vintage tone Milkman have unveiled an incredible unit that packs heaps of genuine valve-powered sound into a pedal-sized unit: say hello to The Amp!
This incredibly pint-sized bit of gear is powered by a single 12AX7 valve and a class-D power amp; it delivers an oustanding 50 watts power at 8ohms or 100 watts at 4ohms!
Valve power
You've got 3-knobs on the preamp EQ controls, allowing plenty of room for your tone to breathe - but in reality, this thing relies on its punchy valve power to deliver astonishing tone without hassle! It also conceals a digital spring reverb that is highly responsive (you honestly won't believe that it's digital) and an analogue tremolo built-in. You really can attain red hot vintage sounds and effects with this thing - no more lugging around your retro-style 2x12 combo!
Ultimate travel amp
The circuitry feeds into multiple outputs; you've got a headphone out, a speaker out (speakon or 1/4" jack), a pedal out (if you want to utilise its tone in your effects chain rather than as an amplifier) and finally an XLR out with cab sim. It really does tick all the boxes, making it the ultimate travelling performance and recording companion, without compromising on tone!
Here's what Milkman says about The Amp:
What is The Amp? First and foremost, it’s a 50W Guitar amplifier. The preamp is based around a single 12AX7 running at high voltage in a discrete Class A circuit. The tube preamp reacts with a guitar the same way any tube amplifier does: it generates harmonics and the sweet sounding high fidelity tone that tubes are known for. Along with tube EQ. there is on-board reverb and tremolo effects so that The Amp can be used as a grab and go amplifier. Foot switches for bypassing the effects are built in. A Class D power section delivers 50 watts into 8ohms, or 100 watts into 4ohms. The Speakon combination jack for speaker output takes either a standard 1/4” connection or a locking Speakon connector for extra security.
The Amp has an integrated headphone amplifier which sounds identical to the output from a speaker. This is perfect for practice, auditioning pedals, or for those times when noise is not appropriate. The Amp can operate with no speaker attached so it can live on a pedalboard and go wherever the pedals go. Speaking of travel, The Amp has a universal IEC power input. It can run from 100 to 260 VAC. No matter where it is on Earth, it can be plugged into a wall socket and used with no need for additional power accessories.
How about a compact studio quality tube preamp? The internal XLR output delivers a balanced line level output. There is no modeling or simulation involved, no menus or presets to give option anxiety. It is very straightforward and simple to get great tone from the tube preamp of The Amp and use it as the front end for a modeling system, recording setup, or for playing direct on stage.
Specifications:
- 50 watts (8ohms) or 100 watts (4ohms)
- Fuelled by a single 12AX7 valve
- Class-D power amp
- Universal Voltage
- 3-knob preamp controls
- Digital spring reverb
- Analog tremolo
- Outputs: speakon, 1/4" jack, pedal out, XLR with cab sim, headphone out
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
US Purveyors of classy vintage tone Milkman have unveiled an incredible unit that packs heaps of genuine valve-powered sound into a pedal-sized unit: say hello to The Amp!
This incredibly pint-sized bit of gear is powered by a single 12AX7 valve and a class-D power amp; it delivers an oustanding 50 watts power at 8ohms or 100 watts at 4ohms!
Valve power
You've got 3-knobs on the preamp EQ controls, allowing plenty of room for your tone to breathe - but in reality, this thing relies on its punchy valve power to deliver astonishing tone without hassle! It also conceals a digital spring reverb that is highly responsive (you honestly won't believe that it's digital) and an analogue tremolo built-in. You really can attain red hot vintage sounds and effects with this thing - no more lugging around your retro-style 2x12 combo!
Ultimate travel amp
The circuitry feeds into multiple outputs; you've got a headphone out, a speaker out (speakon or 1/4" jack), a pedal out (if you want to utilise its tone in your effects chain rather than as an amplifier) and finally an XLR out with cab sim. It really does tick all the boxes, making it the ultimate travelling performance and recording companion, without compromising on tone!
Here's what Milkman says about The Amp:
What is The Amp? First and foremost, it’s a 50W Guitar amplifier. The preamp is based around a single 12AX7 running at high voltage in a discrete Class A circuit. The tube preamp reacts with a guitar the same way any tube amplifier does: it generates harmonics and the sweet sounding high fidelity tone that tubes are known for. Along with tube EQ. there is on-board reverb and tremolo effects so that The Amp can be used as a grab and go amplifier. Foot switches for bypassing the effects are built in. A Class D power section delivers 50 watts into 8ohms, or 100 watts into 4ohms. The Speakon combination jack for speaker output takes either a standard 1/4” connection or a locking Speakon connector for extra security.
The Amp has an integrated headphone amplifier which sounds identical to the output from a speaker. This is perfect for practice, auditioning pedals, or for those times when noise is not appropriate. The Amp can operate with no speaker attached so it can live on a pedalboard and go wherever the pedals go. Speaking of travel, The Amp has a universal IEC power input. It can run from 100 to 260 VAC. No matter where it is on Earth, it can be plugged into a wall socket and used with no need for additional power accessories.
How about a compact studio quality tube preamp? The internal XLR output delivers a balanced line level output. There is no modeling or simulation involved, no menus or presets to give option anxiety. It is very straightforward and simple to get great tone from the tube preamp of The Amp and use it as the front end for a modeling system, recording setup, or for playing direct on stage.
Specifications:
- 50 watts (8ohms) or 100 watts (4ohms)
- Fuelled by a single 12AX7 valve
- Class-D power amp
- Universal Voltage
- 3-knob preamp controls
- Digital spring reverb
- Analog tremolo
- Outputs: speakon, 1/4" jack, pedal out, XLR with cab sim, headphone out
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Related Products
-
SOLD OUT
Milkman SoundSold OutOriginal price $2,495.00Current price $1,995.00The Amp is now available in a 12" combo with many of the same features as the pedal: universal power input between 100-240V, a balanced line level...
View full detailsOriginal price $2,495.00Current price $1,995.00
