You are the artist. Your sound is the paint, and this is your canvas. Canvas Nano Line Isolator (LI) is a compact line isolator designed to be an ideal fit for busy pedalboards or fly rigs where space is limited. It removes resistance between you and your audience, giving you a pristine sonic foundation to build your masterpiece on. From houses of worship to the dive bar downtown, Canvas Nano is built to be the performance tool that goes wherever you are making your music.
Canvas Nano is a passive device that converts your unbalanced signal into a balanced signal for interfacing properly with your recording interface or mixer at front-of-house. If you’re using an amp-in-a-box (DSP Guitar Rig), like our ACS1, or running an active acoustic or active bass guitar direct, then the Canvas Nano is your new bridge to the front-of-house. The signal will remain at full volume and be converted to a balanced signal via the transformer connected to the XLR output. Less preamp gain will be required in LI mode. The Canvas Nano packs everything you need from a LI into a compact enclosure designed to look great right on top of your board.
Need a stereo solution? Check out the Canvas Stereo Dual DI/LI
Canvas Nano LI Features
•Compact design perfect for tight pedal board layouts or small fly rigs.
•Flat frequency response from 20Hz-20kHz
•Converts ¼” unbalanced input to XLR balanced output.
•Transformer isolated output.
•GND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.
•Custom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.
•Passive device, no power source required.
DI or LI?
Not sure if you need a DI or LI? When deciding between DI or LI, check with the manufacturer of your gear to
find the output impedance of the device you want to interface with.
For a general guide:•High Impedance (above 1kΩ) → Use a DI
•Low Impedance (below 1kΩ) → Use a LI
See also: Canvas Mono D.I. / L.I. and Canvas Stereo D.I. / L.I.
SPECS
•Canvas Nano comes in a lightly textured matte black enclosure with blue, light green, yellow, orange,
red, and white ink.
•Impedance: DI - 10k input, 600 output; LI - 600 input, 600 output
•Dimensions (L × H × W): 95 mm × 34 mm × 43 mm / 3.74in x 1.33in x 1.69in
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Videos
You are the artist. Your sound is the paint, and this is your canvas. Canvas Nano Line Isolator (LI) is a compact line isolator designed to be an ideal fit for busy pedalboards or fly rigs where space is limited. It removes resistance between you and your audience, giving you a pristine sonic foundation to build your masterpiece on. From houses of worship to the dive bar downtown, Canvas Nano is built to be the performance tool that goes wherever you are making your music.
Canvas Nano is a passive device that converts your unbalanced signal into a balanced signal for interfacing properly with your recording interface or mixer at front-of-house. If you’re using an amp-in-a-box (DSP Guitar Rig), like our ACS1, or running an active acoustic or active bass guitar direct, then the Canvas Nano is your new bridge to the front-of-house. The signal will remain at full volume and be converted to a balanced signal via the transformer connected to the XLR output. Less preamp gain will be required in LI mode. The Canvas Nano packs everything you need from a LI into a compact enclosure designed to look great right on top of your board.
Need a stereo solution? Check out the Canvas Stereo Dual DI/LI
Canvas Nano LI Features
•Compact design perfect for tight pedal board layouts or small fly rigs.
•Flat frequency response from 20Hz-20kHz
•Converts ¼” unbalanced input to XLR balanced output.
•Transformer isolated output.
•GND Lift: Isolates the GND pin on XLR to help reduce hum if present. Leave out for normal operation.
•Custom wound transformers for low THD (Total Harmonic Distortion) and full frequency response.
•Passive device, no power source required.
DI or LI?
Not sure if you need a DI or LI? When deciding between DI or LI, check with the manufacturer of your gear to
find the output impedance of the device you want to interface with.
For a general guide:•High Impedance (above 1kΩ) → Use a DI
•Low Impedance (below 1kΩ) → Use a LI
See also: Canvas Mono D.I. / L.I. and Canvas Stereo D.I. / L.I.
SPECS
•Canvas Nano comes in a lightly textured matte black enclosure with blue, light green, yellow, orange,
red, and white ink.
•Impedance: DI - 10k input, 600 output; LI - 600 input, 600 output
•Dimensions (L × H × W): 95 mm × 34 mm × 43 mm / 3.74in x 1.33in x 1.69in
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
