The Canvas Rehearsal is your all-in-one rehearsal tool. Designed for musicians who use effect pedals, you can listen to your instrument through headphones, play with tracks via Bluetooth or 1/8” auxiliary input, and practice with a built-in metronome.
The Canvas Rehearsal is the perfect end-of-chain solution when your gig requires your practice to become perfection.
The Rehearsal is loaded with features to simplify practice with maximum results. The OLED display gives quick readouts of BPM (Beats Per Minute), Time Signature, Beat Division, and Accent Note. Simply rotate the Screen Control Encoder to fine -tune settings and press down to cycle to the next parameter.
The BPM can be set in three different ways:
1. Use the Tap Tempo button on the face of the pedal to quickly tap in a tempo.
2. Press and hold the Start/Stop switch to enter “Tap Mode” then tap in a tempo by pressing down on the switch.
3. Dial in a precise tempo by using the Screen Control Encoder to any specific tempo from 40 to 250 BPM.
Meter, Tap Division, and accent beat can be further customized with your BPM as well.
Flexible volume controls allow for your perfect practice mix. Separately adjust and set the volume for your instrument, metronome, and auxiliary audio input then use the main headphone volume to adjust the overall output.
The Rehearsal can be controlled via standard MIDI messages. Simply connect your MIDI controller to the Rehearsal MIDI “IN”. Downstream MIDI devices can be connected to the MIDI “OUT” which serves as a MIDI pass-through.
SPECS
• 9v 300mA Minimum
• Center Negative, 2.1mm center pin, 5.5mm barrel
Audio input:
• 2x Unbalanced 1/4” Audio Input Connectors
- Impedance: 1M Ohm
- Frequency Response: 20hz To 20khz
• 1x Trs Stereo 1/8” Auxiliary Input
- Impedance: 100k Ohm
Audio output:
• 2x Unbalanced 1/4” Audio Output Connectors
- Impedance: 220 Ohm
- Frequency Response: 20hz To 20khz
- Snr: 1vrms @ 1khz = 85db
- Thd+N: 8vpp @ 1khz = 0.006%
• 1x Trs Stereo Headphone Output
- Impedance: 16 Ohm
- Frequency Response: 20hz To 20khz
- Snr: 1vrms @ 1khz = 85db
- Thd+N: 1vpp @ 1khz = 0.02%
MIDI:
• 1x MIDI Trs Type A Input
• 1x MIDI Trs Type A Thru
Bluetooth Information:
• Bluetooth Version 4.2
• Uses A2DP Protocol for Audio over Bluetooth
• Antenna: PCB Monopole
• Includes FFCID: 2AC7Z-ESP32WROOM32U
Exact size of the diecast enclosure is 2.25”x2.93”x4.8” including jacks.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Videos
The Canvas Rehearsal is your all-in-one rehearsal tool. Designed for musicians who use effect pedals, you can listen to your instrument through headphones, play with tracks via Bluetooth or 1/8” auxiliary input, and practice with a built-in metronome.
The Canvas Rehearsal is the perfect end-of-chain solution when your gig requires your practice to become perfection.
The Rehearsal is loaded with features to simplify practice with maximum results. The OLED display gives quick readouts of BPM (Beats Per Minute), Time Signature, Beat Division, and Accent Note. Simply rotate the Screen Control Encoder to fine -tune settings and press down to cycle to the next parameter.
The BPM can be set in three different ways:
1. Use the Tap Tempo button on the face of the pedal to quickly tap in a tempo.
2. Press and hold the Start/Stop switch to enter “Tap Mode” then tap in a tempo by pressing down on the switch.
3. Dial in a precise tempo by using the Screen Control Encoder to any specific tempo from 40 to 250 BPM.
Meter, Tap Division, and accent beat can be further customized with your BPM as well.
Flexible volume controls allow for your perfect practice mix. Separately adjust and set the volume for your instrument, metronome, and auxiliary audio input then use the main headphone volume to adjust the overall output.
The Rehearsal can be controlled via standard MIDI messages. Simply connect your MIDI controller to the Rehearsal MIDI “IN”. Downstream MIDI devices can be connected to the MIDI “OUT” which serves as a MIDI pass-through.
SPECS
• 9v 300mA Minimum
• Center Negative, 2.1mm center pin, 5.5mm barrel
Audio input:
• 2x Unbalanced 1/4” Audio Input Connectors
- Impedance: 1M Ohm
- Frequency Response: 20hz To 20khz
• 1x Trs Stereo 1/8” Auxiliary Input
- Impedance: 100k Ohm
Audio output:
• 2x Unbalanced 1/4” Audio Output Connectors
- Impedance: 220 Ohm
- Frequency Response: 20hz To 20khz
- Snr: 1vrms @ 1khz = 85db
- Thd+N: 8vpp @ 1khz = 0.006%
• 1x Trs Stereo Headphone Output
- Impedance: 16 Ohm
- Frequency Response: 20hz To 20khz
- Snr: 1vrms @ 1khz = 85db
- Thd+N: 1vpp @ 1khz = 0.02%
MIDI:
• 1x MIDI Trs Type A Input
• 1x MIDI Trs Type A Thru
Bluetooth Information:
• Bluetooth Version 4.2
• Uses A2DP Protocol for Audio over Bluetooth
• Antenna: PCB Monopole
• Includes FFCID: 2AC7Z-ESP32WROOM32U
Exact size of the diecast enclosure is 2.25”x2.93”x4.8” including jacks.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
