Darkglass Electronics B7K Ultra V2 'The Squid' Limited Edition!
or make 4 interest-free payments of $167.25 fortnightly with More info
Microtubes B7K Ultra v2 Aux In “The SQUID” Limited Edition!
In collaboration with the vision, taste and superb art of Ignacio Bazan Lazcano, we combined new engraving techniques and our latest technology to make this pedal look and feel like none of the brand’s previous products.
Limited to 1000!!
Whereas the Level Knob controls the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI level control.
Mixes the clean input signal with the overdriven signal. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine control of the blend ratio.
Sets the volume of the overdriven signal.
Sets the amount of saturation in the overdriven signal.
Sets the amount of treble content to saturate: The "Boost" setting emphasizes the treble content extra clarity and presence. The "Flat" position leaves this register untouched while the "Cut" position will reduce the amount of high frequencies being saturated.
Sets the amount of low frequency content to saturate by selecting between three different bass boost levels before the clipping stage.
+-12dB @ 100Hz
+-12dB switchable 250Hz, 500Hz and 1kHz
+-12dB switchable 750Hz, 1.5KHz and 3kHz
+-12dB @ 5kHz
Balanced XLR output for connecting the pedal to a microphone preamp, PA system etc.
Disconnects the signal ground on the Direct Output to break any ground loops. Set this switch to either position that has less noise. The switch does not affect the ¼” output.
Toggle the cabinet simulation on/off on the Direct Output. This switch completely bypasses all digital circuits and allows you to get a zero latency signal when needed.
B7K Ultra has an internal stereo headphone amplifier capable of driving a minimum load of 16 ohms from the 3.5mm stereo jack. Use the Master volume control to adjust the level.
A Micro USB B connector allows you to connect the pedal to PC/Mac to load cabinet simulation impulse responses to the pedal and control various other settings.
125x96x57 mm (4,92x3,77x2,24 in)
- Single user loadable cabinet simulation impulse response
- Maximum impulse length 21 ms
- 48 kHZ, 16-bit internal processing
- 1.6 ms latency
- 92 dynamic range
- Micro- USB B port to connect to PC/Mac
- 3.5 mm headphone output with cabinet simulation.
- 3.5 mm stereo auxiliary input.
- Balanced XLR output with switchable cabinet simulation and switchable ground lift.
- Input impedance: 1M ohm
- Output impedance: 1k ohm
- Power supply: 9V DC centre negative
- DC current consumption: 120 mA
WARNING: When the pedal is on bypass the master volume does not affect the headphone volume. In this case the total volume is adjustable in Darkglass Suite. With sensitive headphones the bypass volume can be very loud if not adjusted.
The Microtubes B7K Ultra v2 has a current draw of 120mA. Only use a regulated 9V DC adapter with a centre-negative plug. Due to ecological reasons, it does not accept batteries. Unregulated power supplies and/or higher voltages may result in suboptimal noise performance and even damage your unit, voiding the warranty
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions.
If an item you receive is faulty get in touch with us ASAP.
Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP!
This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment.
Just treat it nice and all will be good!
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
"LOVE IT Or Exchange It Within 14 Days"!
The item MUST BE sent back in the same condition it arrived in and have all the materials it arrived with (manual,warranty card,all accessories) and be packaged in the original box.
Items returned in undesired condition (scratched,chipped, etc) will be subject to a restocking charge of up to 30%. Modded items will not be refunded!
Postage must be paid by the purchaser to get the item returned to us and we will exchange at our discretion the amount of the products but not the postage costs.
Items must arrive here within 14 days of your order being placed.
Some items cannot be returned like Pedalboards you have already put velcro on, strings, pedalboard tape, Cables and DIY cable kits.
Please don't use the Manufacturers box as the packing box or you will automatically be charged a 30% restocking fee!
Email us BEFORE returning your items so we can resolve or sort out any problems you may have and just so we know to expect the item. You may also want to insure or register your item as we don't take responsibility for lost or damaged post.