BRISBANE (07) 3892 3292
FREE SHIPPING! ON ORDERS OVER $199!!

Goodwood Audio Audition

or make 4 interest-free payments of $22.25 fortnightly with Afterpay More info

Any guitar player that has been using pedals for longer than 5 minutes knows that GAS (gear acquisition syndrome) is a real thing.  Since re-wiring your pedal board is not something you want to be doing every time you want to try a new pedal, Audition allows you to patch...

Any guitar player that has been using pedals for longer than 5 minutes knows that GAS (gear acquisition syndrome) is a real thing.  Since re-wiring your pedal board is not something you want to be doing every time you want to try a new pedal, Audition allows you to patch in a new pedal without having to re-wire your entire board.  Also use Audition to run your pedal board into an amps FX loop without having to re-patch your board. 

 

Signal Chain For Auditioning 
Audition can be placed anywhere in your signal chain. The first thing you need to decide is which types of pedals you will audition the most. If you are going to audition a lot of overdrive pedals, put Audition closer to the beginning of your signal chain. If you are going to audition modulation, delays and reverbs, put Audition closer to the end of your signal chain. If you are unsure, put Audition after your last overdrive and before your modulation effects.

 

Signal Chain For Using An Amp FX Loop
If you are going to be using an amp’s FX loop, place

 Audition after your last overdrive/dry effect and route signal to the ‘In’ jack on Audition. Now the ‘Send’ jack goes to the input of your amp, the ‘Return’ jack connects to FX send on your amp, the ‘Out’ jack goes to your modulation effects and the output of your last modulation effect goes to the FX return on your amp.  If you don’t want to use the FX loop, simply unplug the send and return jacks and plug the last pedal on your board to the amp input.  

In this configuration you can still audition pedals as normal. 

 

Push Button 
The push button is on Audition for musicians running Audition underneath their angled pedal board. Since a lot of angled pedal boards come with side panel jacks, you can now patch Audition into the side panel jacks and turn Audition ON to try a new pedal, or turn Audition OFF to bypass the side panel jacks and pass signal un-interrupted.

 

Power

The power jacks on Audition are used to power the LED and more importantly to the pedal being auditioned. Plug in 9-18v on the In/Out side of Audition and use the included DC cable to power the pedal you want to try.
NOTE: make sure that the power supply you use to power Audition has enough amperage (mA) to power the pedal you are wanting to audition.

 

We believe in providing quality products and services, which is why we endeavour to keep as many of the processes involved in building our products here in Sydney, Australia.

 

IMPORTANT – Use only 9vDC centre negative power! Current draw – 1mA plus the current draw of the pedal being auditioned.
Dimensions – 66mm L x 111mm W x 31mm H (including all jacks and push buttons).

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions.

If an item you receive is faulty get in touch with us ASAP.

Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP!

This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment.

Just treat it nice and all will be good!

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

"LOVE IT Or Exchange It Within 14 Days"!

The item MUST BE sent back in the same condition it arrived in and have all the materials it arrived with (manual,warranty card,all accessories) and be packaged in the original box.

Items returned in undesired condition (scratched,chipped, etc) will be subject to a restocking charge of up to 30%. Modded items will not be refunded!

Postage must be paid by the purchaser to get the item returned to us and we will exchange at our discretion the amount of the products but not the postage costs.

Items must arrive here within 14 days of your order being placed.

Some items cannot be returned like Pedalboards you have already put velcro on, strings, pedalboard tape, Cables and DIY cable kits.

Please don't use the Manufacturers box as the packing box or you will automatically be charged a 30% restocking fee!

Email us BEFORE returning your items so we can resolve or sort out any problems you may have and just so we know to expect the item. You may also want to insure or register your item as we don't take responsibility for lost or damaged post.

You Might Like

Sale

Unavailable

Sold Out