Greer Amps TarPit Fuzz
or make 4 interest-free payments of $77.50 fortnightly with More info
The TarPit Integrated Circuit Fuzz Machine is the newest release from Greer Amps. This pedal was created out of the desire to have the sound and feel of a vintage Muff style fuzz, with grit, and grind that will sustain for days. Based on the vintage Big Muff Pi variant that utilizes two integrated circuits, with some Greer Amps tweaks (not the standard 4 transistor version), the Tarpit has all of the sounds that one might expect from a Muff style fuzz, and so much more.
The Tarpit is built in a rugged powdercoated aluminum enclosure, with printed graphics, designed by Nick DePartee (an awesome graphic designer, and former guitarist for the band Kutless). We chose the most awesome metallic blue powdercoat color that we could track down, and had the graphics set in black and white. The Tarpit features custom Oxblood control knobs by Davies (these knobs are currently available in a limited supply).
With the Sustain control set low, the Tarpit can get dark, and spitty, with a low gain, almost gated feel. Increasing the Sustain control has a double effect—the Tarpit gets slightly brighter, and the fuzz, sustain, and harmonics all increase. The wide sweep tone control brings a new level of versatility to the Tarpit. Turning the tone control down cuts treble, and boosts bass frequencies; setting the tone control in the middle, or slightly above, allows for full guitar and bass frequencies to come out. If you want to get really crazy, push the tone control higher, and you’ll get into some AM radio type frequencies. The volume control utilizes a slightly later taper on the potentiometer. We did this in an effort to allow the user to get their awesome sustain and fuzz at lower volumes when needed…never fear, though, the Tarpit can get as loud as you need it to!
The Tarpit can run off of a battery, or a standard 2.1mm, negative center pin power supply. We placed the in and out jacks along the top of the pedal, as well as the DC jack, in an effort to help with pedalboard layout. The output jack is closest to the volume control.
The Tarpit features Greer Amps’ lifetime warranty, to the original owner, and is built like a tank. We utilize a custom fabricated board that is over engineered, so that you don’t have to worry about your pedal letting you down. The two integrated circuits are mounted in chip sockets, so if anything ever happens to the chips, they can easily be replaced.
ON TOUR AND IN STUDIO WITH DWEEZIL ZAPPA, JIMBO HART (BASS PLAYER FOR JASON ISBELL), LAUR JOAMETS (GUITARIST FOR STURGILL SIMPSON), AND MANY MORE!
- Vintage Muff tones, ranging from spitty fuzz to over the top sustain
- Wide sweep tone control, for boosted bass tones, or peaked out highs
- Based on a rare, vintage Big Muff Pi, utilizing two IC's, instead of the normal transistorized version
- Beautiful blue metallic powdercoated enclosure
- Black and white printed graphics, designed by Nick DePartee (former guitarist for Kutless)
- Limited Oxblood colored Davies control knobs
- Hand wired in Athens, GA
- True Bypass
- Uses 9-Volt battery or standard neg. center, 2.1mm power supply
- Built with top quality components
- Lifetime Warranty to the original owner
- Pedals are currently built to order, and will ship within 1-2 weeks of your order and payment
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions.
If an item you receive is faulty get in touch with us ASAP.
Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP!
This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment.
Just treat it nice and all will be good!
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
"LOVE IT Or Exchange It Within 14 Days"!
The item MUST BE sent back in the same condition it arrived in and have all the materials it arrived with (manual,warranty card,all accessories) and be packaged in the original box.
Items returned in undesired condition (scratched,chipped, etc) will be subject to a restocking charge of up to 30%. Modded items will not be refunded!
Postage must be paid by the purchaser to get the item returned to us and we will exchange at our discretion the amount of the products but not the postage costs.
Items must arrive here within 14 days of your order being placed.
Some items cannot be returned like Pedalboards you have already put velcro on, strings, pedalboard tape, Cables and DIY cable kits.
Please don't use the Manufacturers box as the packing box or you will automatically be charged a 30% restocking fee!
Email us BEFORE returning your items so we can resolve or sort out any problems you may have and just so we know to expect the item. You may also want to insure or register your item as we don't take responsibility for lost or damaged post.