Skip to content

Hamstead Zenith Amplitude Controller

$459.00
Sold out
Love it, or swap within 14 days | Free Gravity Pick!
Afterpay
4 interest-free payments of $114.75 More info

Free Shipping for orders over $199

Orders usually arrive in 2 - 3 days Free if spend over $199

Love it, or swap within 14 days

Don't like what you hear? No worries - swap within 14 days.

Best service in town

4.8 / 5 from over 150+ Google Reviews Buy from the best in AUS.

;

The Ultimate Tone Shaper

Tone is more than just guitars, amps and pedals; but the voice of the player. Once your core elements are brought together, you can refine your sound or even push it to a whole new level.

This is Zenith: a powerful EQ, Boost, and Compressor delivered in one compact and incredibly flexible package. From subtle tone shaping and compression that is felt and not heard, through to extreme sound sculpting and sustain beyond the natural realm, Zenith’s three circuits cover it all. Digitally controlled switching then allows the 100% analogue EQ and Compression circuits to be accessed independently, all via one OptoKick footswitch.

Overview

Treble, Middle and Bass controls are nothing new to guitar effects, but with Zenith we have endeavoured to voice these parameters to not only sound but feel natural to use. Boosted high frequencies are present but not harsh; boosted lows remain tight while adding warmth, and the Middle control offers a huge amount of flexibility with its three-position ‘Q’ and Frequency switches. 

Compression is an often misunderstood and potentially complex effect in guitar culture. We wanted to design a circuit that was simple to use but at the same time incredibly high quality and versatile. Our compression circuit has a very fast attack and medium/long release and is designed to work with any setup and remain very transparent. The feel of the compression can also be dialled in with the Blend control, allowing natural pick attack but also hugely increased sustain. Covering a wide range from subtle level balancing through to hard compression with very musical bloom, pro compression has never been easier to achieve.

  • +20dB of completely clean and transparent gain
  • Switchable mid frequency and Q for powerful tone shaping
  • Blend control to dial in the feel of the compression
  • Secret Switching to give full control over the EQ and Comp circuits independently
  • Active 3 band EQ with an amp-like and natural feel
  • Incredibly transparent compression circuit with a low noise floor
  • Switchable order of the EQ and Comp circuits, with a Parallel mode
  • Control input for switching via an external controller such as GigRig G2/3

Secret Switching

Zenith is our first pedal to feature ‘Secret Switching’ for independent control of the EQ and Compression circuits. For those using loopers we wanted to bring back functionality to the OptoKick and adding two switches to a compact pedal makes both difficult to operate on a tightly packed pedalboard.

By holding down the OptoKick, the pedal enters the programming mode with 5 switching options; Standard (both on, both off), Flip/Flop, Comp always on, EQ always on, and Cycle. For example: Zenith can be used as an always on EQ with compression engaged via the switch, or used to Flip/Flop between the two effects.

Your Gig Tone at Home Levels

With its balance of EQ and Compression Zenith is the perfect FX loop attenuator. When you have found your tonal nirvana at gig volume, turning an amp down to practise levels often results in EQ changes and lack of output tube sag and saturation. By running Zenith in the FX loop, you can first bring down the volume with the Level control without affecting preamp gain. Adjusting the EQ then brings back your original tone, and by adding a touch of compression the feel of tube sag returns with musical bloom. With Zenith, you can recreate the sound and feel of your amp at its best at all volume levels.

An all-analogue circuit with digital control designed by Peter Hamstead.

Zenith features silent optical switching and The GigRig’s OptoKick footswitch for excellent reliability.

Specification

  • All-analogue design with digital control
  • Dimensions: 70w x 130d x 65h mm (inc. hardware)
  • Weight: 575g / 1.27lbs
  • Power Requirement: DC (centre negative)
    9V - 280mA or 12V - 200mA or 18V - 160mA
  • Input Impedance: 600K Ohms
  • Output Impedance: < 300 Ohms
  • Warranty: 5 Year Limited Warranty
  • Designed and built in Great Britain

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

Videos

The Ultimate Tone Shaper

Tone is more than just guitars, amps and pedals; but the voice of the player. Once your core elements are brought together, you can refine your sound or even push it to a whole new level.

This is Zenith: a powerful EQ, Boost, and Compressor delivered in one compact and incredibly flexible package. From subtle tone shaping and compression that is felt and not heard, through to extreme sound sculpting and sustain beyond the natural realm, Zenith’s three circuits cover it all. Digitally controlled switching then allows the 100% analogue EQ and Compression circuits to be accessed independently, all via one OptoKick footswitch.

Overview

Treble, Middle and Bass controls are nothing new to guitar effects, but with Zenith we have endeavoured to voice these parameters to not only sound but feel natural to use. Boosted high frequencies are present but not harsh; boosted lows remain tight while adding warmth, and the Middle control offers a huge amount of flexibility with its three-position ‘Q’ and Frequency switches. 

Compression is an often misunderstood and potentially complex effect in guitar culture. We wanted to design a circuit that was simple to use but at the same time incredibly high quality and versatile. Our compression circuit has a very fast attack and medium/long release and is designed to work with any setup and remain very transparent. The feel of the compression can also be dialled in with the Blend control, allowing natural pick attack but also hugely increased sustain. Covering a wide range from subtle level balancing through to hard compression with very musical bloom, pro compression has never been easier to achieve.

  • +20dB of completely clean and transparent gain
  • Switchable mid frequency and Q for powerful tone shaping
  • Blend control to dial in the feel of the compression
  • Secret Switching to give full control over the EQ and Comp circuits independently
  • Active 3 band EQ with an amp-like and natural feel
  • Incredibly transparent compression circuit with a low noise floor
  • Switchable order of the EQ and Comp circuits, with a Parallel mode
  • Control input for switching via an external controller such as GigRig G2/3

Secret Switching

Zenith is our first pedal to feature ‘Secret Switching’ for independent control of the EQ and Compression circuits. For those using loopers we wanted to bring back functionality to the OptoKick and adding two switches to a compact pedal makes both difficult to operate on a tightly packed pedalboard.

By holding down the OptoKick, the pedal enters the programming mode with 5 switching options; Standard (both on, both off), Flip/Flop, Comp always on, EQ always on, and Cycle. For example: Zenith can be used as an always on EQ with compression engaged via the switch, or used to Flip/Flop between the two effects.

Your Gig Tone at Home Levels

With its balance of EQ and Compression Zenith is the perfect FX loop attenuator. When you have found your tonal nirvana at gig volume, turning an amp down to practise levels often results in EQ changes and lack of output tube sag and saturation. By running Zenith in the FX loop, you can first bring down the volume with the Level control without affecting preamp gain. Adjusting the EQ then brings back your original tone, and by adding a touch of compression the feel of tube sag returns with musical bloom. With Zenith, you can recreate the sound and feel of your amp at its best at all volume levels.

An all-analogue circuit with digital control designed by Peter Hamstead.

Zenith features silent optical switching and The GigRig’s OptoKick footswitch for excellent reliability.

Specification

  • All-analogue design with digital control
  • Dimensions: 70w x 130d x 65h mm (inc. hardware)
  • Weight: 575g / 1.27lbs
  • Power Requirement: DC (centre negative)
    9V - 280mA or 12V - 200mA or 18V - 160mA
  • Input Impedance: 600K Ohms
  • Output Impedance: < 300 Ohms
  • Warranty: 5 Year Limited Warranty
  • Designed and built in Great Britain

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!