Moonbow is an adaptation of a classic voltage-controlled dual-mode filter paired with a hot-rodded version of the channel strip from our Mixer. The filter is placed in front of the overdrive, for gentle signal compression or bold saturation of its resonant peaks. The flexibility of the gain and level controls allows for use with both instrument level and line level.
CONTROLS
GAIN: Adjustable from -13dB to +20dB. Turn clockwise to increase gain.
LVL: Output volume level. Turn CCW
to cut and CW to boost.
CUTOFF: Adjusts the frequency range of the filter from 20Hz to 5kHz.
RES: Controls the resonance of the filter. Caution should be exercised when pushing past seventy percent. Strong oscillations will occur.
HP/LP toggle: Switch between
high pass filter & low pass filter.
CV IN: Control voltage input for ‘CUTOFF.’ Accepts 0-5V.
SPECS
• 137mm x 80mm x 67mm
• 1/4" mono jacks for I/O
• 3.5mm mono jack for CV
• Input impedance: 500kΩ
• Output impedance: 1kΩ
• True bypass with relay switching
• Current draw: 50mA
• Power: 9VDC, 2.1mm center negative barrel
For CV control, there are a variety of devices available: several eurorack modules, Mission Engineering EQD-1, TWA Side-Step, Pedal Brainz, Dreadbox Psyclop and others.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Moonbow is an adaptation of a classic voltage-controlled dual-mode filter paired with a hot-rodded version of the channel strip from our Mixer. The filter is placed in front of the overdrive, for gentle signal compression or bold saturation of its resonant peaks. The flexibility of the gain and level controls allows for use with both instrument level and line level.
CONTROLS
GAIN: Adjustable from -13dB to +20dB. Turn clockwise to increase gain.
LVL: Output volume level. Turn CCW
to cut and CW to boost.
CUTOFF: Adjusts the frequency range of the filter from 20Hz to 5kHz.
RES: Controls the resonance of the filter. Caution should be exercised when pushing past seventy percent. Strong oscillations will occur.
HP/LP toggle: Switch between
high pass filter & low pass filter.
CV IN: Control voltage input for ‘CUTOFF.’ Accepts 0-5V.
SPECS
• 137mm x 80mm x 67mm
• 1/4" mono jacks for I/O
• 3.5mm mono jack for CV
• Input impedance: 500kΩ
• Output impedance: 1kΩ
• True bypass with relay switching
• Current draw: 50mA
• Power: 9VDC, 2.1mm center negative barrel
For CV control, there are a variety of devices available: several eurorack modules, Mission Engineering EQD-1, TWA Side-Step, Pedal Brainz, Dreadbox Psyclop and others.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Related Products
-
NEW
JHS PedalsIn Stock$339.00The Violet Distortion is a new take on distortion/overdrive brought to you from the collaborative minds of Josh Scott and highly influential Brazil...
View full details$339.00 -
Walrus AudioIn Stock$379.00Eras is a no apologies, high-gain distortion that’s ready to chug, shred, and palm mute with tight response and multiple clipping options. Use the...
View full details$379.00
