here are so many reasons to add the JHS Pedals Buffered Splitter to your pedalboard. But the most important one is great tone. If you,ve ever split your guitar,s signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will perfectly drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back.
Simple and effective signal-splitting device
There are a ton of applications for adding a Buffered Splitter to your signal chain. Whether moving a tuner out of line or running a dual-amp setup, once you use the JHS Buffered Splitter, you,ll never be without one again. Here are just a few options.
- Send one signal to a tuner that is out of the signal chain while retaining your full tone
- In a dual-amp setup, both amplifiers will see a powerful, clean signal
- Bassists can send one side to their amplifiers, while sending the other to the board
Keeps your tone clear, powerful, and pristine
If you,re as pedal happy as we are at JHS, you,re going to want this quality buffer in your signal chain. The Buffered Splitter is like giving each output a shot of adrenaline, ensuring they hit your amp with the same strength and character as they left your fingers.
- Converts your guitar,s hi-Z signal to lo-Z for driving long cables and pedal chains
- Retains the original tone of your guitar without coloration from the other gear in your signal chain
Convenient low-profile design
A device such as the Buffered Splitter is content to be a workhorse piece of gear that quietly does its job in the background. That,s why we designed this little guy to be compact, sturdy, and simple to integrate into your rig.
- Small size is ideal for saving pedalboard space
- Can easily be mounted underneath your board
- Built rugged
- Black powder coating keeps the buffer hidden in the background
This pedal requires standard 9V DC Negative power, consumes 19mA, and measures 3.6"x1.5"x1"
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
here are so many reasons to add the JHS Pedals Buffered Splitter to your pedalboard. But the most important one is great tone. If you,ve ever split your guitar,s signal with a passive device, adapter, or even certain effects pedals, you know that the results can sometimes be less than stellar. This happens because many of those products simply cut your tone in two, sending one half one way and the other half the other way. You can end up with a tone that is muddy and lifeless. Adding our Buffered Splitter to your chain not only avoids these issues, but it will perfectly drive your long cable runs and pedalboard chains as well. Trust us on this one. If you need to split your signal for any host of reasons, putting our Buffered Splitter on your board will give you your tone back.
Simple and effective signal-splitting device
There are a ton of applications for adding a Buffered Splitter to your signal chain. Whether moving a tuner out of line or running a dual-amp setup, once you use the JHS Buffered Splitter, you,ll never be without one again. Here are just a few options.
- Send one signal to a tuner that is out of the signal chain while retaining your full tone
- In a dual-amp setup, both amplifiers will see a powerful, clean signal
- Bassists can send one side to their amplifiers, while sending the other to the board
Keeps your tone clear, powerful, and pristine
If you,re as pedal happy as we are at JHS, you,re going to want this quality buffer in your signal chain. The Buffered Splitter is like giving each output a shot of adrenaline, ensuring they hit your amp with the same strength and character as they left your fingers.
- Converts your guitar,s hi-Z signal to lo-Z for driving long cables and pedal chains
- Retains the original tone of your guitar without coloration from the other gear in your signal chain
Convenient low-profile design
A device such as the Buffered Splitter is content to be a workhorse piece of gear that quietly does its job in the background. That,s why we designed this little guy to be compact, sturdy, and simple to integrate into your rig.
- Small size is ideal for saving pedalboard space
- Can easily be mounted underneath your board
- Built rugged
- Black powder coating keeps the buffer hidden in the background
This pedal requires standard 9V DC Negative power, consumes 19mA, and measures 3.6"x1.5"x1"
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Related Products
-
$189.00The Empress buffer was designed to be the complete I/O interface for the pedal board, while maintaining the highest fidelity to your guitar's sign...
View full details$189.00 -
$145.00This may be the greatest weapon you didn,t know you needed. For those of us who are a little "pedal happy" there can be some downfall to our tone. ...
View full details$145.00 -
SOLD OUT
$135.00Every pedal board needs a good buffer. Buffers balance out your impedance and get that loss of highs back on track, especially with multiple pedal...
View full details$135.00
