Power Supply Cables

2.1mm Voltage Doubling Cable - 18V or 24V For pedals with higher voltage requirements, use this voltage doubling cable with three 2.1mm straight ba...

Voltage Doubler Adapter - 18V or 24V For pedals with higher voltage requirements, use this voltage doubling adapter with a 2.1mm jack to combine t...

 5.5mm x 2.1mm Plug With No End Plug A 2.1mm straight barrel connector on a 36 inch/92 cm cable terminating with a bare end. DIY parts are recommen...

2.1mm -  2.5mm “Red” Barrel (straight) Designed to power the Line 6 DL4, MM4, FM4, DM4, and AM4 digital modeling pedals which require a reverse pol...

 A cable with 2.1mm straight barrel connectors and reverse (center positive) cable polarity made for JangleBox, some Fulltone pedals, some Moogerfo...

 5.5mm x 2.1mm Standard Center NegativeThis is the most common plug type found on Boss, most Ibanez, most Dunlop, MXR (new Dunlop-era), Line 6 Tone...

 Eleven (11) of the most commonly used cables with the Pedal Power 2+. Part # PPBAR-R - Six cables with 2.1mm right angle barrel center ne...

  Output Splitter Adapter - Ground Lifted This splitter adapter cable divides one Pedal Power output to two pedals. The splitter has two 2.1mm jack...

 For pedals with higher power requirements, use this current doubling adapter with a 2.1mm jack to combine two Pedal Power outputs. (Frequently use...

 A battery snap works with any effect that runs on 9V battery including vintage pedals without power jacks.

 A cable with a 2.1mm barrel and a 3.5mm mini plug with standard (tip positive) polarity. The 3.5mm mini plug cable connection is compatible with o...

2.5mm Straight Barrel AC Cable Pedal Power AC Cable:This cable with two 2.5mm straight barrel connectors powers units like the Digitech Whammy, Lin...

If you use a switch mode supply to power your pedals and want to hear the true clear well defined tones, you need a noise cancelling device such as...

IEC60320 C14 to IEC60320 C5

CI-PTKit Pedaltrain mounting kit

CI-8800 Parallel Adapter Flex (sand grey) Current doubler Use this cable to combine the current from two outputs to double the current for high...

CI-4022 Stack Flex - 5,5/2,5mm centre positive DC-plug / 50cm Reverse polarity voltage doubler with 2.5mm plug. For use with some EHX, Eventide,...

CI-2201 Booster Flex type 1 - voltage doubler, 50cm (black)

CI-2200 Series Adapter Flex (white) Plug this cable into two 9v outputs to combine the sum of the voltages to give you 18v.

CI-1533 3-way daisy chain Flex type 1 - 30+30+50cm (black)

CI-1035 Split Flex - 5,5/2,1mm DC-plug / 30 & 50cm Use this cable to power two pedals from one outlet on the power supply.

CI-1022 Voltage doubler for standard Boss style 2.1mm DC connections. Stack Flex - 5,5/2,1mm centre negative DC-plug / 50cm

CI-1001  Extension Flex, 50cm (Black)

CI-6050 50cm - 9V battery clip