Voodoo Lab power supplies

OverviewThe Pedal Power 3 series is the first lightweight, high current, international voltage power supply to deliver zero-noise performance. Its...

OverviewThe Pedal Power 3 series is the first lightweight, high current, international voltage power supply to deliver zero-noise performance. Its...

Pedal Power X4 is a professional isolated power supply for both battery operated and high current DSP effects. Its ultra-compact size fits even th...

Pedal Power X4 Expander Kit adds four isolated 9V DC outputs to compatible Voodoo Lab® power supplies. Its ultra-compact size makes adding on to y...

 Filter, regulate, isolate, and protect! Pedal Power 2 Plus does it, and does it well, because any less will degrade your pedal’s performance. Play...

OverviewDingus ¼” Feed-Thru adds easy-access audio cable connectivity to a Voodoo Lab Dingbat® pedalboard. This handy add-on works for both mono an...

Pedal Power® MONDO is a high-current capable power supply that can power the largest and most diverse pedalboards. From digital power-hungry effect...

 These brackets are for mounting your Voodoo Lab power supply to your Pedaltrain pedalboard.  Small Bracket - These are for older Pedaltrain models...

 5.5mm x 2.1mm Standard Center NegativeThis is the most common plug type found on Boss, most Ibanez, most Dunlop, MXR (new Dunlop-era), Line 6 Tone...

Voltage Doubler Adapter - 18V or 24V For pedals with higher voltage requirements, use this voltage doubling adapter with a 2.1mm jack to combine t...

2.1mm Voltage Doubling Cable - 18V or 24V For pedals with higher voltage requirements, use this voltage doubling cable with three 2.1mm straight ba...

 For pedals with higher power requirements, use this current doubling adapter with a 2.1mm jack to combine two Pedal Power outputs. (Frequently use...

  Output Splitter Adapter - Ground Lifted This splitter adapter cable divides one Pedal Power output to two pedals. The splitter has two 2.1mm jack...

 A cable with a 2.1mm barrel and a 3.5mm mini plug with standard (tip positive) polarity. The 3.5mm mini plug cable connection is compatible with o...

 A battery snap works with any effect that runs on 9V battery including vintage pedals without power jacks.

2.5mm Straight Barrel AC Cable Pedal Power AC Cable:This cable with two 2.5mm straight barrel connectors powers units like the Digitech Whammy, Lin...

 A cable with 2.1mm straight barrel connectors and reverse (center positive) cable polarity made for JangleBox, some Fulltone pedals, some Moogerfo...

2.1mm -  2.5mm “Red” Barrel (straight) Designed to power the Line 6 DL4, MM4, FM4, DM4, and AM4 digital modeling pedals which require a reverse pol...

 5.5mm x 2.1mm Plug With No End Plug A 2.1mm straight barrel connector on a 36 inch/92 cm cable terminating with a bare end. DIY parts are recommen...

 Eleven (11) of the most commonly used cables with the Pedal Power 2+. Part # PPBAR-R - Six cables with 2.1mm right angle barrel center ne...

PRODUCT OVERVIEWPedal Power X8 is an ultra-compact high current isolated international voltage power supply that delivers reliable, zero-noise perf...

Voodoo Lab HX Current Doubler Cable PPHX The Voodoo Lab HX Current Doubler Cable combines two high current Pedal Power outputs (400mA or greater) ...