Since the fuzz effect was invented in the early sixties, guitar players have gone to great lengths to achieve the perfect fuzz tone. Legends say that Duane Allman placed his fuzz pedal in the freezer between sessions to cool down the transistors, and that Roger Mayer meticulously modified Hendrix’s Fuzz Faces beyond recognition in search of an elusive, magical fuzz experience. Fortunately, even apart from these mythological methods, there’s one trick that always works: use a dying battery. Inherently simple devices like fuzz circuits are extremely sensitive to the amount of voltage that they receive, thus any change in the voltage from your power supply will cause drastically different tones. Guitarists eventually caught on to this hack and began draining their batteries to try and find the sweet spot for their fuzz pedal. A good idea in theory, but who has time for that? Then, just a few years ago, a certain unnamed guitarist reached out to me for a practical solution for this technique– and the Volture was born.
The Volture is a modern day device for your vintage fuzz circuitry. Simply place it in between your power supply and your pedal, and you can precisely trim the input voltage and perfectly replicate the tone of a dying battery. As the song says, “Power is made by power being taken.”
Though we developed it specifically for vintage fuzz circuits, the Volture will work on any fully analog pedal. In fact, you might be surprised by the trippy sounds you find lurking in your favorite overdrive or distortion.
With the Volture, you can input 9, 12 or 18VDC and output an adjustable voltage from 7.5VDC down to 1.25VDC, creating gated, distorted, possibly glitchy but always sputtery fuzz sounds. Input voltage is 9VDC to 18VDC, center negative. Output voltage is 1.25VDC to 7.5VDC, center negative. The Volture uses 10mA in addition to the power when it is active. The Volture should be used with pedals less than 50mA.
NOTE: As you turn the voltage down, the LED will dim simultaneously with the voltage level.
THE VOLTURE USES INDUSTRY STANDARD 2.1MM POWER SUPPLY CABLES
THIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 12MA, AND MEASURES 3.6"X1.5"X1"
**WARNING**
The Volture should not be paired with any digital/logic circuitry-based pedal, otherwise the user risks potential damage to the pedal being powered due to inadequate voltage. As long as your pedal is all analog, you’ll be fine. A dying battery never hurt an analog circuit.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Since the fuzz effect was invented in the early sixties, guitar players have gone to great lengths to achieve the perfect fuzz tone. Legends say that Duane Allman placed his fuzz pedal in the freezer between sessions to cool down the transistors, and that Roger Mayer meticulously modified Hendrix’s Fuzz Faces beyond recognition in search of an elusive, magical fuzz experience. Fortunately, even apart from these mythological methods, there’s one trick that always works: use a dying battery. Inherently simple devices like fuzz circuits are extremely sensitive to the amount of voltage that they receive, thus any change in the voltage from your power supply will cause drastically different tones. Guitarists eventually caught on to this hack and began draining their batteries to try and find the sweet spot for their fuzz pedal. A good idea in theory, but who has time for that? Then, just a few years ago, a certain unnamed guitarist reached out to me for a practical solution for this technique– and the Volture was born.
The Volture is a modern day device for your vintage fuzz circuitry. Simply place it in between your power supply and your pedal, and you can precisely trim the input voltage and perfectly replicate the tone of a dying battery. As the song says, “Power is made by power being taken.”
Though we developed it specifically for vintage fuzz circuits, the Volture will work on any fully analog pedal. In fact, you might be surprised by the trippy sounds you find lurking in your favorite overdrive or distortion.
With the Volture, you can input 9, 12 or 18VDC and output an adjustable voltage from 7.5VDC down to 1.25VDC, creating gated, distorted, possibly glitchy but always sputtery fuzz sounds. Input voltage is 9VDC to 18VDC, center negative. Output voltage is 1.25VDC to 7.5VDC, center negative. The Volture uses 10mA in addition to the power when it is active. The Volture should be used with pedals less than 50mA.
NOTE: As you turn the voltage down, the LED will dim simultaneously with the voltage level.
THE VOLTURE USES INDUSTRY STANDARD 2.1MM POWER SUPPLY CABLES
THIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 12MA, AND MEASURES 3.6"X1.5"X1"
**WARNING**
The Volture should not be paired with any digital/logic circuitry-based pedal, otherwise the user risks potential damage to the pedal being powered due to inadequate voltage. As long as your pedal is all analog, you’ll be fine. A dying battery never hurt an analog circuit.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!