Skip to content

Second Hand Mask Audio Electronics Part Garden

$220.00
Sold out
Love it, or swap within 14 days | Free Gravity Pick!
Afterpay
4 interest-free payments of $55.00 More info

Free Shipping for orders over $199

Orders usually arrive in 2 - 3 days

Free if spend over $199. Large Packages excluded

Love it, or swap within 14 days

Don't like what you hear? No worries - swap within 14 days.

Best service in town

4.8 / 5 from over 450+ Google Reviews Buy from the best in AUS.

No Box

 

Collector//Emitter and Mask Audio Electronics are excited to introduce Part Garden

Part Garden grew from the idea of stacking fuzz pedals. It's essentially two fuzzes within one pedal, with both tuned to bring out the best of the other. We spent a long time trying to find the perfect, versatile combination, with the ability to work as a smooth overdrive, a wild fuzz, and anything in between. The first fuzz is fairly warm and the second is harmonically rich, though this will change as you adjust the controls. This is a very dynamic pedal, so be sure to use your volume control to get even more range out of it.

I, II, and III are all volume controls in different stages of the pedal. As you change each, you'll notice that each of them changes the volume, tone, and gain of the pedal. There is no tone control on Part Garden because it's so easy to adjust the shape of the signal with the gain controls. Set I higher for clangy high end, or II higher for thicker low end.

I - How much signal is entering Part Garden, sets the general gain level

II - The gain between the two circuits. This will also subtly attenuate bass frequencies as the gain is turned down

III - Master volume, turn right for more

Texture - Changes the gain structure in the first stage. This will increase the gain and the amount of compression from the fuzz. When set fully clockwise the signal is so compressed that nothing will pass through unless boosted by another pedal. Because of what the control is adjusting, some crackling may occur while turning the knob.

YUH- Changes the range of the Texture control. The up position will give you optimal range for adjustment, while the down position will allow finer tuning of more extreme sounds

Changes for V2.x
- soft touch relay bypass
- completely redesigned power supply for less noise
- slight reduction in spiky high-end frequencies

Uses standard Boss style power supply (9VDC 2.1mm center negative) and top-mounted jacks. Enclosures are Hand Screen Printed by Pinebox Customs. Art By Taylor C Adams

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!

No Box

 

Collector//Emitter and Mask Audio Electronics are excited to introduce Part Garden

Part Garden grew from the idea of stacking fuzz pedals. It's essentially two fuzzes within one pedal, with both tuned to bring out the best of the other. We spent a long time trying to find the perfect, versatile combination, with the ability to work as a smooth overdrive, a wild fuzz, and anything in between. The first fuzz is fairly warm and the second is harmonically rich, though this will change as you adjust the controls. This is a very dynamic pedal, so be sure to use your volume control to get even more range out of it.

I, II, and III are all volume controls in different stages of the pedal. As you change each, you'll notice that each of them changes the volume, tone, and gain of the pedal. There is no tone control on Part Garden because it's so easy to adjust the shape of the signal with the gain controls. Set I higher for clangy high end, or II higher for thicker low end.

I - How much signal is entering Part Garden, sets the general gain level

II - The gain between the two circuits. This will also subtly attenuate bass frequencies as the gain is turned down

III - Master volume, turn right for more

Texture - Changes the gain structure in the first stage. This will increase the gain and the amount of compression from the fuzz. When set fully clockwise the signal is so compressed that nothing will pass through unless boosted by another pedal. Because of what the control is adjusting, some crackling may occur while turning the knob.

YUH- Changes the range of the Texture control. The up position will give you optimal range for adjustment, while the down position will allow finer tuning of more extreme sounds

Changes for V2.x
- soft touch relay bypass
- completely redesigned power supply for less noise
- slight reduction in spiky high-end frequencies

Uses standard Boss style power supply (9VDC 2.1mm center negative) and top-mounted jacks. Enclosures are Hand Screen Printed by Pinebox Customs. Art By Taylor C Adams

Warranty & Returns

All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!

Shipping

We send A LOT of packages every week so don't worry about the shipping side of things!

We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.

If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.

We ship mainly with Australia Post but may use a courier depending on location and size of the package.

Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.

Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.

Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!