Second Hand Weber Mini Mass Speaker Attenuator
This attenuator has a main volume knob and 3-position treble compensation switch which affect the signal to the speaker. The line out signal is dependent on your amplifier settings.
Impedance selector for 4, 8, 16 ohms, 3-position treble compensation switch, MASS bypass switch, unbalanced line out. The MiniMASS employs an actual speaker motor for realistic interaction between the attenuator and the output circuit of the amplifier. The attenuation is continuously adjustable from about -3dB to over -50dB.
By turning the speaker control to minimum (maximum attenuation), the unit may be used as a dummy load for testing or for DI use.
5.5” x 5.5” footprint (add 1” in front for knob). 3.75” tall. 3.35 lbs basic.
Line Out jack has no volume control and is dependent on your amp volume setting, but we do offer a Line Level Volume Control here:
There is an option to add a headphone output, and this adds an extra jack with an independent volume control. For the footswitch option, we install a relay which requires 7.5V external power. This only powers the relay – the attenuator itself is still passive. We include the power plug but the footswitch itself is not included. You can use any latching footswitch, including one incorporated in a multi-effect floor unit.
This item is hand-built to order, to ensure the best attention to detail is paid to its construction. We build them one at a time, on a table – not hundreds at a time on an assembly line. This allows us to reduce the margin for error and produce an overall higher-quality product. Please allow at least 7-10 business days for your order to be built and then shipped.
IMPORTANT NOTE ABOUT HIGH GAIN AMPS*: *if you have a Fender or similar amp, and play with cleaner tones, this part does not apply to you. High gain amps such as Marshall or clones (with heavy distortion) are hard on attenuators. Unfortunately, an amp’s volume dial is not a good indicator of how much power is being produced. Many amps can reach full power at 3 or 4 on the volume dial, so it is a good suggestion to get an attenuator with 4x the power handling. For example, if you have a 50w high gain amp, you should opt for the MASS 200. If you have a 100w amp, you should still go with the MASS 200 but you should not crank the amp.
1) do not attenuate too far down. this puts a lot of power through a very small section of the volume rheostat which can cause it to fail
2) also do not turn your amp all the way up. even if you’re just knocking a little off the top with the attenuator, it’s a good idea to keep the amp somewhere in the middle at most. it’s best to find the lowest volume on the amp that is the acceptable tone to you, and then use the attenuator to bring it the rest of the way.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
This attenuator has a main volume knob and 3-position treble compensation switch which affect the signal to the speaker. The line out signal is dependent on your amplifier settings.
Impedance selector for 4, 8, 16 ohms, 3-position treble compensation switch, MASS bypass switch, unbalanced line out. The MiniMASS employs an actual speaker motor for realistic interaction between the attenuator and the output circuit of the amplifier. The attenuation is continuously adjustable from about -3dB to over -50dB.
By turning the speaker control to minimum (maximum attenuation), the unit may be used as a dummy load for testing or for DI use.
5.5” x 5.5” footprint (add 1” in front for knob). 3.75” tall. 3.35 lbs basic.
Line Out jack has no volume control and is dependent on your amp volume setting, but we do offer a Line Level Volume Control here:
There is an option to add a headphone output, and this adds an extra jack with an independent volume control. For the footswitch option, we install a relay which requires 7.5V external power. This only powers the relay – the attenuator itself is still passive. We include the power plug but the footswitch itself is not included. You can use any latching footswitch, including one incorporated in a multi-effect floor unit.
This item is hand-built to order, to ensure the best attention to detail is paid to its construction. We build them one at a time, on a table – not hundreds at a time on an assembly line. This allows us to reduce the margin for error and produce an overall higher-quality product. Please allow at least 7-10 business days for your order to be built and then shipped.
IMPORTANT NOTE ABOUT HIGH GAIN AMPS*: *if you have a Fender or similar amp, and play with cleaner tones, this part does not apply to you. High gain amps such as Marshall or clones (with heavy distortion) are hard on attenuators. Unfortunately, an amp’s volume dial is not a good indicator of how much power is being produced. Many amps can reach full power at 3 or 4 on the volume dial, so it is a good suggestion to get an attenuator with 4x the power handling. For example, if you have a 50w high gain amp, you should opt for the MASS 200. If you have a 100w amp, you should still go with the MASS 200 but you should not crank the amp.
1) do not attenuate too far down. this puts a lot of power through a very small section of the volume rheostat which can cause it to fail
2) also do not turn your amp all the way up. even if you’re just knocking a little off the top with the attenuator, it’s a good idea to keep the amp somewhere in the middle at most. it’s best to find the lowest volume on the amp that is the acceptable tone to you, and then use the attenuator to bring it the rest of the way.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
