Walrus Audio Voyager Pre-Amp/Overdrive mkII
The Voyager MKII is a mid-focused overdrive/preamp that contains all the mythical magic from the original Voyager and adds a wealth of features not seen before in a Klon-style pedal. From its lowest to highest settings, the Voyager provides a uniquely superb amount of clarity to any playing style.
At lower gain settings, it brightens the signal and adds clarity to each note. With the gain turned up, the Voyager transforms into a thick overdrive, providing depth to chorded playing while retaining the clarity needed to break through solos.
The Voyager MKII breaks out of the traditional Centaur three-knob topography by adding a foot-switchable parametric mid-frequency EQ with a boost/cut range of +/-12dB. The Freq (Frequency) knob then controls the center frequency of where the Mid knob is set, giving a range of 250Hz-2kHz. Great for accommodating any guitar and pickup combination and tailoring your tone to your own style of playing.
Further customize the Voyager’s sound with the five-way rotary switch:
1: Classic 1N34A Germanium Diodes (most compressed). This is the original Voyager sound.
2: Classic 1N34A Germanium Diodes with bass boost (trust us).
3: Symmetric Silicon Diodes (more open and dynamic).
4: Asymmetric Silicon Diodes (least compressed, open & driven).
5: Asymmetric Silicon Diodes with bass boost (least compressed, open & driven with a bass boost.)
Think of each position as a different “flavor” of the pedal. Fine-tune each of these modes with the
Mid/Freq EQ for a near-infinite supply of gain options.
Specs:
• The Voyager comes in two variants: seafoam with black ink with the Voyager satellite illustrated by the original Voyager artist, Nathan Price. The minimalist version comes in matte black with cream ink with the space helmet illustrated by Christi Du Toit.
• Input: 1/4" TS, Unbalanced, 1M impedance, Output: 1/4" TS, Unbalanced, 100k impedance
• True Bypass
• 9V DC, center negative, 100mA min – 2.62 x 4.77 x 2.25 inches including knobs.
• Designed and assembled in the USA.
• The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
• Daisy chain power supplies are not recommended. Power supply not included.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Videos
Walrus Audio Voyager Pre-Amp/Overdrive mkII
The Voyager MKII is a mid-focused overdrive/preamp that contains all the mythical magic from the original Voyager and adds a wealth of features not seen before in a Klon-style pedal. From its lowest to highest settings, the Voyager provides a uniquely superb amount of clarity to any playing style.
At lower gain settings, it brightens the signal and adds clarity to each note. With the gain turned up, the Voyager transforms into a thick overdrive, providing depth to chorded playing while retaining the clarity needed to break through solos.
The Voyager MKII breaks out of the traditional Centaur three-knob topography by adding a foot-switchable parametric mid-frequency EQ with a boost/cut range of +/-12dB. The Freq (Frequency) knob then controls the center frequency of where the Mid knob is set, giving a range of 250Hz-2kHz. Great for accommodating any guitar and pickup combination and tailoring your tone to your own style of playing.
Further customize the Voyager’s sound with the five-way rotary switch:
1: Classic 1N34A Germanium Diodes (most compressed). This is the original Voyager sound.
2: Classic 1N34A Germanium Diodes with bass boost (trust us).
3: Symmetric Silicon Diodes (more open and dynamic).
4: Asymmetric Silicon Diodes (least compressed, open & driven).
5: Asymmetric Silicon Diodes with bass boost (least compressed, open & driven with a bass boost.)
Think of each position as a different “flavor” of the pedal. Fine-tune each of these modes with the
Mid/Freq EQ for a near-infinite supply of gain options.
Specs:
• The Voyager comes in two variants: seafoam with black ink with the Voyager satellite illustrated by the original Voyager artist, Nathan Price. The minimalist version comes in matte black with cream ink with the space helmet illustrated by Christi Du Toit.
• Input: 1/4" TS, Unbalanced, 1M impedance, Output: 1/4" TS, Unbalanced, 100k impedance
• True Bypass
• 9V DC, center negative, 100mA min – 2.62 x 4.77 x 2.25 inches including knobs.
• Designed and assembled in the USA.
• The use of an isolated power supply is recommended for powering all Walrus Audio Pedals.
• Daisy chain power supplies are not recommended. Power supply not included.
Warranty & Returns
All New products are covered by the manufacturers new warranty. Please check their website for the length of warranty and warranty conditions. If an item you receive is faulty get in touch with us ASAP. Second Hand products come with a 4 week warranty from us. If there is an issue let us know ASAP! This covers normal use and does not cover accidental damage, misuse, wrong power plugged into it, modding, water damage or any other damage caused by mistreatment. Just treat it nice and all will be good!
Shipping
We send A LOT of packages every week so don't worry about the shipping side of things!
We've never lost a thing and your awesome new gear will be packed up really well to avoid any damage in transit.
If your order comes in before 2pm we will ship it same day. Most of the time we pack things up all the way to 4pm so just call if you need it to leave same day after 2pm.
We ship mainly with Australia Post but may use a courier depending on location and size of the package.
Free Post ships with Australia Post standard and expected shipping times are between 4-6 business days depending on location. It will be longer to outside of metro and rural areas.
Express Post will usually be with you next business day in metro areas of QLD, NSW, SA, VIC and TAS. WA will take 2 days to metro and extra days after that to out side metro and rural areas.
Everything we ship has a tracking number with the exception of some power cables and smaller envelope packages. You will be emailed tracking once your order has been shipped!
Related Products
-
Earthquaker DevicesIn Stock$195.00The Arrows is an all-discrete tone sculpting preamp booster. It was designed with the intention of adding an additional channel of gain to all your...
View full details$195.00 -
FriedmanIn Stock$319.00The Friedman Buxom Boost may be the most powerful tonal solution you ever put on your pedalboard. Like its namesake amp head, this pedal pushes a ...
View full details$319.00 -
JHS PedalsIn Stock$319.00Over the years the Morning Glory is undoubtedly our most known and praised overdrive pedal. It has won more awards and received more accolades tha...
View full details$319.00 -
Bondi EffectsIn Stock$379.00What's new with the Mk3 Version: Same classic Sick As sound Robust power input protection Optimised power delivery network Reduced noise floor ...
View full details$379.00
